How do I change the vertical ordinate dimension in Solidworks?

How do I edit an ordinate dimension in Solidworks?

You can modify ordinate dimensions using commands on the shortcut menu. Right-click an ordinate dimension, select Display Options, then choose from these options: Align Ordinate. Aligns all the dimensions along the ordinate with the 0.0 ordinate.

How do I change the dangling dimension in Solidworks?

Potential Fixes



To set the color for dangling dimensions, click Tools > Options > System Options > Colors . Select Dimensions, Dangling in Color scheme settings. Click Edit, select a color, then click OK. Drag the dangling handle and reattach it to the correct sketch entity.

How do I create an ordinate dimension in Solidworks?

on the Dimensions/Relations toolbar, or click Tools > Dimensions > Ordinate. to specify the direction of the dimensions. Click the first item (edge, vertex, and so on) from which all others will be measured to be the base (the 0.0 dimension), and click again to place the dimension outside the model.

What is an ordinate dimension?

Ordinate dimensions are a set of dimensions measured from a zero ordinate in a drawing or sketch. In drawings, they are reference dimensions and you cannot change their values or use the values to drive the model.

How do I add a horizontal ordinate dimension in Solidworks?

To create horizontal ordinate dimensions: With a drawing or sketch active, click Horizontal Ordinate Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Horizontal Ordinate. Click the first item from which all others will be measured, and click again to place the dimension.

How do you remove dangling dimension in Solidworks?

Information

1. Open the master drawing in SOLIDWORKS. …
2. From the SOLIDWORKS Menu select Tools>Options.
3. Select the Document Properties tab.
4. Select Detailing from the categories on the left.
5. Locate the Hide dangling dimensions and annotations option and check the box next to it.

How do I reattach a dimension in Solidworks?

To reattach a dangling center mark:

1. Right-click the dangling center mark and click Reattach.
2. In the same drawing view, select the hole edge, fillet, or slot whose center mark you want to reattach to the center mark set. The center mark reattaches to the new selection and the connection lines update.

How do you add dimensions to a Solidworks drawing?

You can specify that dimensions marked for drawings be inserted automatically into new drawing views. Go to Tools > Options and in the Document Properties tab, click Detailing. Select Dimensions marked for drawing under Auto insert on view creation.

How do I show hidden ordinate dimensions in Solidworks?

Showing Dimension Names



To show dimension names: Click View > Hide/Show > Dimension Names or Hide/Show Items > View Dimension Names (Heads-up View toolbar).

What is an angular dimension?

Angular dimensions measure the angle between two non-parallel lines, the angle subtended by an arc, or the angle formed by three selected points. In addition, you can control the layer on which the dimension is created.

How do you use ordinate dimension?

To Create an Ordinate Dimension

1. Move the UCS origin to the datum.
2. Click Annotate tab Dimensions panel Dimension. Find.
3. At the prompt, enter o (Ordinate).
4. If you do not want jogs in the ordinate leaders, turn on Ortho mode [F8].
5. Specify a point for the feature location.
6. Specify a leader endpoint.

Which command is used to create ordinate dimensions?

The OrdinateDimension command creates ordinate point Dimensions. The command displays an X or Y coordinate with a Leader line to create X-datum or Y-datum dimensioning. The value of the X or Y coordinate is defined by the point you specify, called the feature location.

Can ordinate dimensions be basic?

This question has a validated answer. We have a pattern of holes which are located using ordinate dimensions. Their tolerance zones are specified using a position tolerance frame, so the dimensions themselves are basic.