How do I change solid in Catia?

How do you use a multi section solid?

Click Multi-sections Solid . The Multi-sections Solid Definition dialog box appears. Select the three section curves as shown: They are highlighted in the geometry area.

…

Guides

1. Remove the selected curve.
2. Replace the selected curve by another curve.
3. Add another curve.

How do you edit parts in Catia?

Open the Edit1. CATPart document. Double-click the draft to be edited (in the specification tree or in the geometry area).

…

command which will display the edit dialog box.

1. Enter a new draft angle value.
2. Click OK . …
3. Now, double-click the pad. …
4. Enter a new length value.
5. Uncheck the Mirrored extent option.

How do you thicken the surface of Catia?

Creating a Thick Surface

1. Select the surface you wish to thicken, that is the extrude element.
2. Click Thick Surface . …
3. Enter 10mm as the First Offset value and 6mm as the Second Offset value.
4. Click More>> .
5. Select the Smoothing mode under the Deviation parameters section. …
6. Click OK .

How do you make rib Catia?

CATPart document.

1. Click Rib . The Rib Definition dialog box is displayed.
2. Select the profile you wish to sweep, i.e. Sketch . 2 . …
3. Select the center curve, i.e. Sketch. 1 . …
4. To go on with our scenario, maintain Keep angle. …
5. Click OK .

How do I use smart move in Catia v5?

Click the Smart Move icon and expand the Smart Move dialog box, including the viewer that appears.

1. The Viewer frame: this window appears only if you pre-select the components affected to perform the smart move. …
2. The Automatic constraint creation option allows you to create constraints to keep the move operation.

What is surface thickness?

The thickness of surface film is equal to range of intermolecular forces of that liquid.

How do you remove materials in Catia?

You can remove material using split and trim command. Split simply cuts the material and trim is the combination of trim and join. If you want to trim, join and give fillet to material, use shape fillet command.

How do you delete parts in Catia?

CATProduct document.

1. Click the Remove icon .
2. Select Body. …
3. The dialog box that appears displays the names as well as the paths of the parts that may be affected by the removal. …
4. Check the option Highlight affected parts to clearly identify the parts affected by the operation.
5. Click OK to confirm.