How do I change floor level in Revit?

How do you change height in Revit?

modifying levels

The Elevation levels can be edited either in the Properties palette > Constraints > Elevation or directly in the level tag. This value represents the building elevation level from a datum level, usually above sea level.

How do you change the floor level in Revit without moving?

The first thing we want to do is select one of the levels, from the properties dialog select Edit Type, then duplicate the current level type and name it Shared. Change the value for the Elevation Base to Shared (prior to 2013), for 2013 change it to Survey Point. Select OK.

Can you change the associated level in Revit?

It is not possible – a new View must be created. If you go to View tab » Plan Views ▼ Floor Plans (or Reflected Ceiling Plan), if you do not see the desired Level in the list, disable the option “Do Not Duplicate Existing Views” at the bottom of the dialog.

How do you move a level in Revit without moving the model?

Click on work view, point (above or below), enter the distance, and press enter. Use “ZE”, zoom extents command. Whith one of the levels selected, go to “Edit Type”, in Properties. Change “Elevation Base” to “Survey Point”.

How do you associate levels in Revit?

Use the following steps to associate section views with a level:

1. Select the Section.
2. From the Properties select Edit Type.
3. Select Duplicate….
4. Add the name of the level to the Name of the new type.
5. Select OK.
6. Change all sections for the current view/ level to the new type.
7. Edit the Visibility Graphics.

How do I assign a level in Revit?

Add Levels

1. Open the section or elevation view to add levels to.
2. On the ribbon, click (Level). Architecture tab Datum panel (Level) …
3. Place the cursor in the drawing area and click. …
4. Draw level lines by moving the cursor horizontally. …
5. Click when the level line is the correct length.

How do I change the view range in Revit?

Modify the View Range

1. Open a plan view.
2. On the Properties palette, locate the View Range parameter, and click Edit. Alternatively, enter VR on the keyboard.
3. In the View Range dialog, modify view range properties as necessary. …
4. Click Apply to view changes.

How do you move the elevation of a project in Revit?

Relocate the Model

1. Click Manage tab Project Location panel Position drop-down (Relocate Project). The Relocate Project tool works similar to the Move tool. As you move the cursor over elements, valid references are highlighted and identified in the status bar.
2. Move the project graphically in the view.

How do you set a project base point and survey point in Revit?

To make these points visible:

1. Click View tab > Graphics panel > Visibility/Graphics.
2. On the Model Categories tab of the Visibility/Graphics dialog, scroll down to Site. …
3. To display the project base point, select Project Base Point.
4. To display the survey point, select Survey Point.

How do I find the base point of a project in Revit?

To see the base point in your revit model, open a site plan and then the visibility graphics window. Expand the Site Category, then make sure the Project Base Point is set to visible. Next select the project base point in the Revit View, and click on the paperclip icon.