Frequent question: What is custom relief type solidworks?

What is a relief solidworks?

The software automatically adds relief cuts wherever needed when inserting bends if you select Auto Relief. The software supports the following types of relief cuts: Rectangular. Tear. Obround.

What is relief ratio in Solidworks?

Relief Ratio



The distance d represents the width of the Rectangular or Obround relief cut and the depth by which the side of the Rectangular or Obround relief cut extends past the bend region. The distance d is determined by the following equation: d = (relief ratio) * (part thickness)

How do you add a relief in Solidworks?

Adding a Corner Relief

1. Click Corner Relief. …
2. In the Corner Relief PropertyManager, under Corner Type, select a two or three bend corner.
3. Under Scope , select the sheet metal body to which to apply the corner relief.
4. Under Corners , click Collect all corners to list all corners in the sheet metal body.

How do you create a relief cut in Solidworks?

Changing Auto Reliefs

1. In the FeatureManager design tree, right-click the feature bend you want to edit, and select Edit Feature.
2. In the PropertyManager, select Custom Relief Type.
3. Under Custom Relief Type: Set a relief cut in Relief Type. If you selected Rectangle or Obround, change the values for Relief Width. …
4. Click .

What is relief in sheet metal?

In sheet metal, a bend relief is an incision cut along the sides of a planned bend. Though bend relief lengths and widths vary between projects, they all share a common goal: preventing tearing and part deformation during the bending process.

What is Corner relief in sheet metal?

About Corner Relief. Use the Corner Relief tool to add relief to one or more corners of a sheet metal part. When you add relief, sheet metal sections are removed from the model. You can apply corner relief automatically to all corners or manually to individual sets of corners.

How do I use the edge flange in Solidworks?

Adding Edge Flanges

1. In an open sheet metal part, click Edge Flange. (Sheet Metal toolbar) or Insert > Sheet Metal > Edge Flange.
2. In the graphics area, select one or more edges for Edge . There are specific requirements for adding edge flanges to curved edges. …
3. Set options in the Edge-Flange PropertyManager and click .

How do you use sheet metal in Solidworks?

To do this we simply need to right-click any tab on the CommandManager and select Sheet Metal from the drop down menu. Next, we will activate the Sheet Metal tab of the Command Manager and click Base Flange/Tab tool, which should be the first tool on the right not grayed out when beginning a part.

How do you make a corner in Solidworks?

Creating a Corner Trim

1. Create a sheet metal part.
2. Click Corner-Trim. (Sheet Metal toolbar) or click Insert > Sheet Metal > Corner Trim.
3. In the Corner-Trim PropertyManager, set the following under Relief Options: Select edges for Corner edges . Click Collect all corners. Select a value for Relief Type. …
4. Click .

How do you calculate K factor?

K factor is a ratio between the distance from the neutral bend line to the inside bend radius and the material thickness. K factor uses the formula K factor = δ/T. Y factor uses the formula Y factor = K factor * (Π/2).

How do you close a corner in Solidworks?

Click Closed Corner (Sheet Metal toolbar) or Insert > Sheet Metal > Closed Corner. Select one or more planar faces for Faces to Extend . The SOLIDWORKS software attempts to find the Faces to Match . If matching faces are not found, you can manually select the Faces to Extend and Faces to Match.

How do you weld corners in Solidworks?

To add weld beads to a sheet metal corner:

1. Click Welded Corner. (Sheet Metal toolbar) or Insert > Sheet Metal > Welded Corner.
2. Select one of the corner faces.
3. Set options in the PropertyManager.
4. Click . Welded corners are suppressed in the flattened state.