Frequent question: How do I use the same sketch for multiple features in Solidworks?

How do you reuse the same sketch in Solidworks?

If you want to reuse the original sketch in another feature, simply make the sketch visible. When editing the sketch you can add contours and use them in the existing features and add new features to the new sketch entries.

How do you copy a whole sketch and reuse in Solidworks?

Copying and Pasting Entire Sketches

1. Select the closed sketch in the FeatureManager design tree.
2. Click Edit > Copy or press Ctrl+C.
3. Click in the sketch or document where you want to paste the center of the sketch.
4. Click Edit > Paste or press Ctrl+V.

How do you duplicate a sketch in Solidworks?

Just about everything! In SOLIDWORKS you can copy and paste: Sketches.
…
Create Drawing View with Copy and Paste

1. Pick the top of a feature tree for a component and select Edit > Copy.
2. Then go to a drawing and select Edit > Paste.
3. SOLIDWORKS has now inserted, or pasted, a copy of that component in a model view in the drawing.

How do I use existing sketch in Solidworks?

Editing an Existing Sketch

1. Click Sketch. on the Sketch toolbar, or click Insert > Sketch. Select an existing sketch to edit.
2. Right-click a sketch in the FeatureManager design tree, or right-click a sketch entity in the graphics area, and select Edit Sketch.

How do you use the same sketch for multiple features?

To create different features with the same sketch:

1. Create a sketch.
2. Create a feature from the sketch.
3. In the FeatureManager design tree, select the same sketch used to create the first feature.
4. Create a second feature from the sketch. You can add additional sketches as required to create the features.

How do I save a sketch as DXF in SOLIDWORKS?

Exporting Drawings as DXF or DWG

1. Click File > Save As.
2. In the dialog box, for Save as type, select DXF or DWG.
3. Click Options.
4. Set options and click OK. …
5. In the Save As dialog box, type the filename and click Save.
6. If the SOLIDWORKS to DXF/DWG Mapping dialog box appears, specify mapping options and click OK.

Can you copy a sketch into another part in SOLIDWORKS?

You can copy an entire sketch and paste it on a face in the current part, or you can paste it into a different sketch, or into a part, assembly, or drawing document. The target document must be open. tool (Sketch toolbar), you can specify to copy the relations.

How do you move a sketch from one plane to another in SOLIDWORKS?

The first and more straightforward way to move a sketch to a different face is to right-click on the sketch in the feature tree. From there, you can click the button to “edit sketch plane.” This will highlight the existing face, and all you need to do to move it is to select the new face.

How do you copy a sketch to another plane?

Solution:

1. Select wireframe on sketch by dragging a window over sketch items.
2. Then use Ctrl C (Copy).
3. Deselect items.
4. Select a new sketch plane for items to be pasted in.

How do you split a sketch into multiple sketches in SOLIDWORKS?

To split a sketch entity:

1. In an open sketch, click Split Entities. (Sketch toolbar) or Tools > Sketch Tools > Split Entities . …
2. Click the sketch entity at the location where you want the split to occur. The sketch entity splits into two entities, and a split point is added between the two sketch entities.

Can you copy features in SOLIDWORKS?

To copy the feature to the part, hold CTRL , and select the Cut Feature in the FeatureManager Design Tree. While holding CTRL and the left mouse button, drag and drop the feature in the desired location.

How do you duplicate items in SOLIDWORKS?

To copy multiple components:

1. In the FeatureManager design tree, Ctrl + select or Shift + select the components to copy.
2. Ctrl + drag the selected components and drop them in the graphics area. New instances of the components are created.

How do I start a new sketch in SOLIDWORKS?

Do one of the following:

1. Click a sketch tool on the Sketch toolbar, such as Rectangle. .
2. Click Sketch. on the Sketch toolbar, or click Insert > Sketch.