Frequent question: How do I show patterns in Solidworks drawing?

How do you show a linear pattern in Solidworks drawing?

In a drawing view, click Linear Note Pattern (Annotations toolbar) or Insert > Annotations > Linear Note Pattern . between the notes. You can also set the spacing in the graphics area .

Where is pattern in Solidworks?

Creating Linear Sketch Patterns

1. In an open sketch, click Linear Sketch Pattern. (Sketch toolbar) or Tools > Sketch Tools > Linear Pattern.
2. In the PropertyManager, under Entities to Pattern, select the sketch entities to pattern .
3. Set values for Direction 1 (X-axis). …
4. Repeat for Direction 2 (Y-axis). …
5. Click .

How do I add a pattern to Solidworks?

To create a fill pattern, click Fill Pattern (Features toolbar) or Insert > Pattern/Mirror > Fill Pattern, set the PropertyManager options, and click . Parameters control the pattern layout. You can create a sheet metal perforation-style pattern, or a pattern of concentric shapes typically used to enhance aesthetics.

How do you show a flat pattern in Solidworks?

Creating Drawings of Flat Patterns

1. Open the sheet metal part for which you want to add a drawing.
2. Click Make Drawing from Part/Assembly. …
3. Select a format or click OK to use the default format.
4. From the View Palette, drag the Flat pattern to the drawing sheet. …
5. Click .

How do I change the linear sketch pattern in Solidworks?

To edit a sketch pattern: Right-click a pattern instance and select the appropriate Edit option. If you selected Display instance count, you can double-click the instance count and change it in the graphics area. Search ‘Editing Sketch Patterns’ in the SOLIDWORKS Knowledge Base.

How do you write a linear pattern in both directions?

Linear Component Pattern

1. Click Linear Component Pattern. …
2. In the PropertyManager, set options under Direction 1: …
3. Repeat for Direction 2 for a bidirectional pattern. …
4. Click in Components to Pattern , then select the seed components.

How do I use the pattern feature in Solidworks?

To use an existing pattern to create a pattern of components:

1. Click Insert, Component Pattern, Feature Driven.
2. Select the seed components for Components to Pattern .
3. Click in Driving Feature and select the pattern feature in the FeatureManager design tree or a face of a pattern instance in the graphics area.

How do you use variable patterns in Solidworks?

To create a variable pattern across a planar or nonplanar surface:

1. In a part document, click Variable Pattern (Features toolbar) or Insert > Pattern/Mirror > Variable Pattern . …
2. In the PropertyManager, for Features to Pattern , select the features to pattern in the graphics area or flyout FeatureManager design tree.

How do I fill a part in SolidWorks?

To create a filled surface, click Filled Surface on the Surfaces toolbar, or click Insert > Surface > Fill, set the PropertyManager options, and click OK .

How do you make a hatch pattern in SolidWorks?

To add an area hatch or solid fill:

1. In a drawing document, select a model face, a segment of a closed sketch profile, or a region bounded by a combination of model edges and sketch entities. …
2. Click Area Hatch/Fill (Annotation toolbar), or click Insert > Annotations > Area Hatch/Fill.

How do you wrap a pattern around an object in SolidWorks?

Wrap

1. Select the sketch you want to wrap from the FeatureManager design tree. …
2. Click Wrap on the Features toolbar, or click Insert > Features > Wrap.
3. In the PropertyManager, under Wrap Type: …
4. If you select Emboss or Deboss , you can select a line, linear edge, or plane to set a Pull Direction . …
5. Click OK .

How do you fix a flat pattern in Solidworks?

Correcting the flatten configuration

1. Open the part file within SOLIDWORKS.
2. Enable the FLAT-PATTERN configuration within the configuration tab (the Flatten tool will likely be un-toggled)
3. If the Flatten tool is un-toggled, re-enable it so the sheet metal returns to its flatten state.

How do you make a flat pattern?

Create a Flat Pattern from a Sheet Metal Model

1. With a single body sheet metal part open, on the ribbon click Sheet Metal tab Flat Pattern panel , click Create Flat Pattern. The flat pattern is created, and displays. …
2. In the browser, double-click the Folded Model node to return to the folded model state or,