Frequent question: How do I load a sweep profile in Revit?

Load or sketch a profile. Click Modify | Sweep tab Sweep panel, and select a profile from the Profile list. If the profile you need is not already loaded in the project, click Modify | Sweep tab Sweep panel (Load Profile) to load the profile.

How do I add a new profile in Revit?

Loaded profiles display in the Project Browser. To create a profile family, open a new family, and sketch a profile using lines, dimensions, and reference planes. After you save the profile family, you can load it and apply it to solid geometry in the project.

How do I edit a sweep profile in Revit?

To edit the existing profile, on the Sweep panel, click (Edit Profile), and use the tools on the Modify | Sweep > Edit Profile tab. On the Mode panel, click (Finish Edit Mode) to finish editing the profile and again to finish editing the sweep.

How do you add a downpipe in Revit?

On the Architecture ribbon, in the Build panel, select Component to place a component. Three component families have already been loaded into this project for use as downpipes. In the Type Selector, select the Straight Rectangular downpipe. Then click to place it at the end of the gutter.

What are the two necessary elements to create a sweep?

Two elements are required to create a sweep surface: Trajectory—Curve or curves that guide the sweep. Cross-sectional sweep profile—Curve or curves that sweep along the trajectory. ◦ One or two trajectories can be used.

How do you sweep a family in Revit?

Create a Sweep

1. In the Family Editor, on the Create tab Forms panel, do one of the following. …
2. Specify the sweep path: …
3. On the Mode panel, click (Finish Edit Mode).
4. Load or sketch a profile. …
5. On the Properties palette, specify the sweep properties. …
6. On the Mode panel, click (Finish Edit Mode).

How do you blend in Revit?

To create a blend, select the blend command. You are placed in the Sketch mode. Select a tool from the Draw menu to draw a closed-loop sketch for the base of the blend. Once the base sketch is complete, click Edit Top on the Mode panel of the contextual tab.

What is sweep in Revit?

Jul 22 2021In-product view. Create a sweep form from a line and a 2D profile sketched perpendicular to the line. The line in the sweep defines the path along which the 2D profile is swept to create the 3D form. The profile consists of linework drawn perpendicular to the line or series of lines that define the path.

How do you make a new wall sweep?

Add a Wall Sweep

1. Open a 3D or elevation view containing the wall to which you want to add the sweep.
2. Click Architecture tab Build panel Wall drop-down (Wall: Sweep).
3. In the Type Selector, select the desired type of wall sweep.

How do you modify a wall sweep?

Select a wall sweep in a 3D or elevation view, or click Architecture tab Build panel Wall drop-down (Wall: Sweep). On the Properties palette, click Edit Type, or click Modify | Place Sweep tab Properties panel Type Properties. In the Type Properties dialog, for Profile, select the desired profile type. Click OK.

How do you create a wall base in Revit?

Creating Wall Baseboard in Revit – Option 1. Creating Wall Baseboard in Revit – Option 2.

…

Creating Wall Baseboard in Revit – Option 1

1. Select the wall.
2. Edit Type (and Edit Structure)
3. Show Preview and switch to Section view.
4. Click the Sweeps button.
5. Add a sweep.