Can you loft a 3D sketch SolidWorks?
Answer: Lofts can use 3D sketch curves to define profiles as well as guide curves. You can even create a Loft from one single 3D sketch containing all of the geometry needed to define profiles and guide curves.
How do you revolve in SolidWorks?
To create a revolved surface:
- Sketch a profile and a centerline around which to revolve the profile.
- Click Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.
- Set the PropertyManager options.
- Click OK .
Can you flatten a 3D sketch in SolidWorks?
In an open part, click Flatten (Surfaces toolbar) or Insert > Surface > Flatten. The Flatten PropertyManager displays. Select faces in the graphics area or from the FeatureManager design tree.
Why can’t I revolve SolidWorks?
Unless you’re creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Try using an Extruded Boss/Base to check whether your profile is closed.
How do you make a lofted surface in SolidWorks?
To create a lofted surface:
- Create a plane for each profile section of the loft. The planes do not need to be parallel.
- Sketch the section profiles on the planes. …
- If necessary, create guide curves. …
- Click Lofted Surface (Surfaces toolbar) or Insert > Surface > Loft.
- Set the PropertyManager options. …
- Click OK .
How do you create a Revolve base in SolidWorks?
Creating Revolve Features
- Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
- Revolved Cut (Features toolbar) or Insert > Cut > Revolve.
- Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.
What is revolve cut in SolidWorks?
Revolved Cut command is generally used for the cutting material from a 3D geometry in Solidworks®. It is working as Revolved Boss/Base but the difference is, it is used for cutting from 3D geometries in Solidworks®. Also, there are other types of the feature of Revolved Cut in Solidworks®.
How do you make a revolve?
To view the revolve, open a 3D view.
…
Use the Draw tools to sketch a shape to revolve around the axis:
- Click Modify | Create Revolve tab Draw panel (Boundary Line).
- To create a single revolve, sketch a closed loop.
- To create more than one revolve, sketch multiple, non-intersecting, closed loops.
How do I flatten a 3d model in Solidworks?
To flatten a surface:
- In an open part, click Flatten (Surfaces toolbar) or Insert > Surface > Flatten. …
- Select faces in the graphics area or from the FeatureManager design tree.
- Then select a vertex. …
- In the PropertyManager, click Relief Cuts.
Why is surface flatten greyed out?
The reason for the “Flatten” icon being greyed out was because the sheet metal part had a “Flat Pattern” annotation view and this annotation view was active. By selecting another annotation view, the “Flatten” icon then becomes available again.
How do you draw a construction line in Solidworks?
Click Tools > Sketch Tools > Construction Geometry. Select the For construction check box in the PropertyManager. Right-click any selected sketch entity and select Construction Geometry.
How do I open a sketch in Solidworks?
In an open sketch, click Tools > Sketch Tools > Check Sketch For Feature. In the dialog box, Feature usage lists all of the ways to use the sketch in a feature: If the sketch was used to create a feature, the feature type is displayed in Feature usage.
What is loft in Solidworks?
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.