Best answer: How do you extrude a surface in SolidWorks?

How do you extrude in Solidworks?

Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.

Is extrude a surface tool?

Watch this video to learn about the Extrude tool. tool to create surfaces by extruding curves, or to create solids by extruding surfaces. You can perform the same extrusion on multiple objects at a time, or a single object.

How do you extrude a curved surface in Solidworks?

To extrude a surface:

1. Sketch the profile of the surface.
2. Click Extruded Surface (Surfaces toolbar) or Insert > Surface > Extrude.
3. Set the PropertyManager options. Extruded surface using Mid Plane from sketched spline.
4. Click OK . Resulting extruded surface.

How do you extrude and remove materials in Solidworks?

Extrude PropertyManager

1. Create a sketch.
2. Click one of the extrude tools: Extruded Boss/Base. on the Features toolbar, or click Insert > Boss/Base > Extrude. Extruded Cut. on the Features toolbar, or click Insert > Cut > Extrude. Extruded Surface. on the Surfaces toolbar, or click Insert > Surface > Extrude.

What is extrude command in Solidworks?

Using the SOLIDWORKS Surface Extrude feature, we can extrude the boundary edges of a face of a solid body or edges of a surface body in a customized direction. When we run the Extruded Surface command, two things can happen: Either a sketch is active or preselected or no sketches exists.

What is extruded boss in Solidworks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

How do you use extrude?

To create a surface of the 2D rectangle, follow the below steps:

1. Type Extrude on the command line < press Enter.
2. Type Mode or M on the command line < press Enter.
3. Type Surface or SU on the command line < press Enter.
4. Select the object to Extrude. …
5. Press Enter.
6. Specify the height of the Extrude.

How do you extrude?

To Create a 3D Solid by Extruding

1. If necessary, on the status bar click Workspace Switching and select 3D Modeling. Find.
2. Click Solid tab > Solid panel > Extrude. Find.
3. Select the objects or edge subobjects to extrude.
4. Specify the height.

What is the command shortcut for extrude?

You can start the Presspull tool by PRES command or by using the CTRL+Shift+E key from your keyboard. Start the command and select the island from the geometry which you want to extrude, you can also click on object boundary to extrude the complete 2D geometry ignoring island.

How do you extrude a curved surface on shape?

Answers

1. Create a sketch with the shape that you want on a plane. This plane needs to be above your part.
2. Extrude Remove the sketch Up To the face of your part. While in the extrude menu, press the offset button to offset the extrude into your shape.

How do I shorten a part in Solidworks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

How do you move a cut-extrude in Solidworks?

To move more than one feature at a time, hold down Ctrl as you select the features.

…

To move a feature to a new place on a model:

1. Select Instant3D (Features toolbar).
2. In the graphics area, select the feature to move.
3. Use the handles to drag the feature to its new location.