Best answer: How do you create a round extrusion in Revit?

How do you create a curved extrusion in Revit?

Extrude a profile curve along a path curve

1. Create the curves you will use for the profile and path.
2. Choose Surfaces > Swept Surfaces > Extrude from the tool palette.
3. Pick the curve or curves you want to extrude. …
4. Click Go.
5. Pick the path curve to extrude along.

How do you lock a circular extrusion in Revit?

Go to the Modify tab and select the Align command from the Modify panel. You can now select the vertical reference plane, then the little cross at the circle centerpoint to lock the circle to that plane. Repeat the Align command to lock the circle to the horizontal reference plane.

How do you create a sphere family in Revit?

The trick is you have to draw half semi-circle and a line. Select both line and semi-circle and create form. You will get sphere as a result.

How do you change the extrusion in Revit?

Edit an Extrusion

1. In the drawing area, select the extrusion.
2. If you are in the project environment: …
3. Click Modify | Extrusion tab Mode panel (Edit Extrusion).
4. If desired, modify the extrusion profile.
5. On the Properties palette, change the visibility, material, or subcategory of the extrusion, if desired.

How do you get curved shapes?

Draw a curve

1. On the Insert tab, in the Illustrations group, click Shapes.
2. Under Lines, click Curve .
3. Click where you want the curve to start, drag to draw, and then click wherever you want to add a curve.
4. To end a shape, do one of the following: To leave the shape open, double-click at any time.

How do I constraint a circle in Revit?

Constraining a circle to reference lines in Revit

1. Select the 2D circle sketch boundary.
2. Activate the yes/no parameter “Center Mark Visible” of the circle.
3. Use the align tool to constrain the midpoint of the circle to the intersection of the two reference lines.

How do you create shapes in Revit?

Create solid geometry with the Create Form tool.

1. On the Create tab Draw panel, select one of the drawing tools.
2. Click in the drawing area, and draw a closed loop.
3. Select the closed loop.
4. Click Modify | Lines tab Form panel (Create Form).

How do you Create a blend in Revit?

To create a blend, select the blend command. You are placed in the Sketch mode. Select a tool from the Draw menu to draw a closed-loop sketch for the base of the blend. Once the base sketch is complete, click Edit Top on the Mode panel of the contextual tab.

Where is Create tab in Revit?

The user interface is missing the Create Tab.

…

Solution

1. On the ribbon, click (Model In-Place). Architecture tab Build panel Component drop-down (Model In-Place) …
2. In the Family Category and Parameters dialog, select the family category, and click OK.
3. Enter a name for the in-place element family, and click OK.

How do you do a void extrusion in Revit?

Click in the drawing area, and draw a closed loop that intersects solid geometry. Select the closed loop. Click Modify | Lines tab Form panel Create Form drop-down (Void Form). A void form extrusion is created.