Best answer: How do I project a surface in Catia?

How do you project a sketch on a curved surface in Catia?

3 Answers

1. sketch the side profile of the buttons in a plane parallel to the front of the controller. if the buttons are mirror image of each other, just sketch one button.
2. pad the sketch to define the button width.
3. add fillets to round off the button ends.
4. mirror the pad and fillets to make the second button.

How do I extract a surface from solid in Catia?

Extracting Geometry

1. Click Extract . The Extract Definition dialog box is displayed. …
2. Select an edge or the face of an element. The selected element is highlighted. …
3. Choose the Propagation type: …
4. Click Show parameters>> to display further options. …
5. Click OK to extract the element.

What is Project 3d elements in Catia?

More about projecting 3D elements



The element to be projected can be either a 3D face, an edge or a vertex. It cannot be a body. Selecting a face results in selecting its boundary edges. The projected geometry is created in the current view.

How do I project edge in Catia?

Double-click the right view to activate it. Click the Project 3D Silhouette Edges icon in the 3D Geometry toolbar ( Use-edge sub-toolbar). In the 3D background of the section view, select the canonical surface to be projected. The silhouette edge is projected onto the right view plane.

How do I project a sketch onto a plane?

Use this selection to project a sketched curve onto a model face.

1. Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree.
2. Under Direction of Projection , select a plane, edge, sketch, or face as the direction of the projected curve.

How do you project a curve?

To project a curve:

1. Click Project Curve on the Curves toolbar, or Insert > Curve > Projected.
2. In the PropertyManager, under Selections, set Projection type to one of the following: Sketch on faces. Use this selection to project a sketched curve onto a model face. …
3. Click .

Where is multiple extract in Catia?

SCENARIO: 1) Start CATIA. 2) Open the CATPart. Workbench: Generative Shape Design 3) Click Multiple Extract icon. Multiple Extract Definition dialog box is displayed.

What is Catia boundary?

The Boundary Definition dialog box appears. Use the combo to choose the Propagation type : Complete boundary: the selected edge is propagated around the entire surface boundary. Point continuity: the selected edge is propagated around the surface boundary until a point discontinuity is met.

How do I extract a surface from a solid in Autocad?

To Extract Curves from Surfaces, Solids, and Faces of Solids

1. Click Surface tab Curves panel Extract Isolines. Find.
2. Select a surface, solid, or face.
3. Click to extract an isoline curve represented by the preview line. …
4. If necessary, enter D the direction in which the curves are detected. …
5. Press Enter to end the command.

What is the full form of Catia?

CATIA (Computer-Aided Three dimensional Interactive Application) software is a complete multi-platform solution for computer-aided design, manufacturing, engineering, 3D and PLM.

What is Element 3D in After Effects?

Element 3D is effectively a 3D animation application within After Effects. It uses an advanced real-time render engine to make 3D objects look almost as good as if they were coming directly from a full 3D application.