Your question: What is revolve in SolidWorks?

What does revolve cut do in SolidWorks?

Revolved Cut command is generally used for the cutting material from a 3D geometry in Solidworks®. It is working as Revolved Boss/Base but the difference is, it is used for cutting from 3D geometries in Solidworks®. Also, there are other types of the feature of Revolved Cut in Solidworks®.

What is revolved boss in SolidWorks?

Revolved Boss or Base is a SolidWorks feature tool which is used to create solid 3D model around an axis. You can revolve the sketch around an axis to add materials to it. You can access revolved boss/base from both command manager and menubar.

How do you use revolve Extrude in SolidWorks?

Creating Extruded or Revolved Cuts as Assembly Features

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you create a Revolve base in SolidWorks?

Creating Revolve Features

1. Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
2. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.
3. Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.

How do you use revolve cut?

Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Extrude or Revolve PropertyManager.

What is the graphics area in SolidWorks?

The graphics area displays and lets you manipulate parts, assemblies, and drawings. A triad appears in part and assembly documents to help orient you when viewing models. You can also use it to change the view orientation.

What is loft in SolidWorks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

What is a revolve feature?

Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.

How do you make a cone in SolidWorks?

To create a cone:

1. Click Solids > Draw > Cone (or type Cone).
2. Set an option for the cone’s base: Center point base: Click in the graphics area to specify a center point or type the 3D coordinates. …
3. Set the cone height: Click in the graphics area or type a value. – or –

Where is revolve in SolidWorks?

Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.

Why can’t I revolve SolidWorks?

Unless you’re creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Try using an Extruded Boss/Base to check whether your profile is closed.

How do you revolve a sketch on Onshape?

From the Sketch or Feature toolbar:

1. Click .
2. Select Solid Creation type: …
3. Select a line, cylindrical edge, or arc to revolve around an axis, or Mate connector (inferred or existing).
4. Activate the Revolve axis field, then click the axis or click the. …
5. Choose whether you want to: …
6. Select a Revolve type: