Your question: What is a subassembly Civil 3D?

What is subassembly in AutoCAD?

A subassembly is an AutoCAD Civil 3D drawing object (AECCSubassembly) that defines the geometry of a component used in a corridor section. … Through tool palette and tool catalogs, AutoCAD Civil 3D provides preconfigured subassemblies for components such as travel lanes, curbs, side slopes and ditches.

How do you create a subassembly in Civil 3D?

To create a subassembly from a polyline

1. Create the desired polyline shape in the drawing.
2. Click Home tab Create Design panel Create Subassembly From Polyline Find.
3. Click the polyline object in the drawing and press Enter.
4. In the Create Assembly dialog box, for Name, enter a name for the subassembly.

How do I create a subassembly in AutoCAD?

Add a lane subassembly



If the Tool Palette containing the subassemblies is not visible, click Home tab >> Palettes panel >> Tool Palettes . In the tool palette, right-click the Tool Palettes control bar. Click Civil Metric Subassemblies. Click the Lanes tab.

How do you copy a subassembly?

You can insert a component by creating a copy of it and placing it in the assembly.

1. In an open assembly, click . …
2. Click Subassembly, and then Standard.
3. Accept the default file name or enter a new file name, and click OK. …
4. Click Copy from existing.
5. Click Browse, select the name of a component to copy, and click Open.

What is Autodesk subassembly composer?

Autodesk® Subassembly Composer for Autodesk® Civil 3D® provides an interface for composing and modifying complex subassemblies, without a need for programming. Subassembly developers can compose complex subassemblies visually and can simulate how the subassembly behaves with different target values and conditions.

How do I import a PKT file into Civil 3D?

This is how we do that:

1. Use the Import Subassemblies feature on the Insert Tab:
2. In the Import Subassemblies dialog, browse to the storage location of the PKT files: C:ProgramDataAutodeskC3D 2019enuSubassembliesImperial or Metric and select all of the PKT files that you want on the Tool Palette.

What is daylight subassembly?

Daylight subassemblies use a surface target parameter to seek out and intersect surfaces based on input parameters. For example, DaylightMaxWidth Subassembly analyzes whether a cut or fill situation exists, and then uses input parameters to tie into a surface.

How do I add a subassembly to an assembly?

To insert a new subassembly: Do one of the following: In the FeatureManager design tree, right-click either the top-level assembly icon or the icon for an existing subassembly, and select Insert New Subassembly. Click New Assembly (Assembly toolbar) or Insert > Component > New Assembly.

How do I add sub assembly tool palette?

To add a subassembly or assembly to a tool palette

1. Click Home tab Palettes panel Tool Palettes Find.
2. Switch to the tool palette you want to add the subassembly or assembly to, or create a new tool palette.
3. Click View tab Palettes panel Content Browser Find.
4. Navigate to the catalog containing the desired assembly.

How do you create a road section in Civil 3D?

To create multiple quick cross sections along a baseline

1. In the Toolspace, on the Toolbox tab, expand Miscellaneous Utilities Surfaces. …
2. When prompted for an option, enter Multiple.
3. In the drawing, pick points to draw a baseline.
4. Press Enter to finish drawing.
5. Enter a sampling interval.
6. Enter a left swath width.

How do you edit assemblies in Civil 3D?

Error loading video source.

1. Open the Parts Editor to the Parts tab.
2. Select an Assembly in the Navigation Panel and right-click.
3. Click New.
4. The new assembly appears in the Navigation Panel with a generic name.
5. In the Base Parts tab, give the new assembly a unique name.
6. Review the Base Parts tab.

How do you make assembly?

To create an assembly in the drawing by inserting an assembly from a tool palette

1. To display the Tool Palettes window: Click Home tab Palettes panel .
2. Open the tool palette containing the desired assembly.
3. On the tool palette, click the assembly, and then click a location in the drawing. Press Enter to end the command.