Your question: How do you make a broken view in Solidworks?

What is a break view in SolidWorks?

You can use a break (or interrupted) view in a drawing. Break views make it possible to display the drawing view in a larger scale on a smaller size drawing sheet. You create a gap or break in the view using a pair of break lines.

How do you slice view in SolidWorks?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.

How do you break an isometric view in SolidWorks?

Model Break Views Within Drawings

1. In the Drawing View PropertyManager, under Reference Configuration, select Show in exploded or model break state.
2. Right-click the drawing view and click Properties. In the dialog box, in Configuration information, select Show in exploded or model break state, and click OK.

How do you do a half view in SolidWorks?

To create a half section view:

1. Open install_dir sampleswhatsnewdrawingssectionview3. slddrw.
2. Click Section View. …
3. In the Section View PropertyManager, click Half Section.
4. In Half Section, click Topside Right .
5. Move the pointer. …
6. Drag the preview to the right and click to place the section view.

How do you remove a break view in Solidworks?

Right-click the broken view, and select Un-Break View. The break lines remain in the view and you can delete them.

How do you break links in Solidworks drawing?

To break the link from the original part file:

1. In the FeatureManager design tree, right-click the inserted third-party native CAD file and click Break Link.
2. In the dialog box, click one of the following: Yes, break the link (cannot be undone) . Breaks the link of the inserted part file from the original file.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

What is a removed section view?

The removed section view is a zero-thickness slice through the model showing only cut edges and hatching perpendicular to the cutting line. That’s different than the traditional section view, which is projected parallel to the cutting line.

What is short break line?

Short break lines are thick, wavy solid lines that are drawn freehand. When either of these break lines is used to shorten an object, you can assume that the section removed from the part is identical to the portions shown on either side of the break. (thin and long with a zigzag)

How do you break an angle view in Solidworks?

In the PropertyManager, under Alignment: Choose the plane and rotation angle for the break.

…

Do one of the following:

1. Click Insert > Model Break View.
2. Click Model Break View (MBD toolbar).
3. In the ConfigurationManager , right-click a configuration and click New Model Break View .

How do I create a detail view in Solidworks?

To create a detail view:

1. Click Detail View. (Drawing toolbar), or click Insert > Drawing View > Detail.
2. The Detail View PropertyManager appears and the Circle tool. is active.
3. Sketch a circle. …
4. When the view is where you want it to be, click to place the view.

How do I cut a half sketch in Solidworks?

(Drawing toolbar) or Insert > Drawing View > Section. In the Section View PropertyManager, click Section or Half Section. You can use Tab to switch between Cutting Lines in Section or Half Section. After you select and place the cutting line in the drawing view, the Section View popup displays.

How do you cut something in Solidworks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.