Your question: How do you create a section model in Solidworks?

How do I create a section view?

A full section view is generated by running the cutting plane through the entire length of the object being sectioned.

1. Click Layout tab Create View panel Section drop-down Full. …
2. Click the view you want to use as the parent view. …
3. Click in the drawing area to indicate the start point of the section line.

How do you create a cutaway in Solidworks?

To create a part cutaway view:

1. In the part: Create a new configuration for the cutaway view. Cut the part as it should appear in the drawing view. …
2. In the drawing: Create a model view of the part using the configuration you made for the cutaway. Add cross hatching to the cut faces.

How do I create a section view in Solidworks assembly?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.

How do I create a half section view in Solidworks?

To create a half section view:

1. Open install_dir sampleswhatsnewdrawingssectionview3. slddrw.
2. Click Section View. …
3. In the Section View PropertyManager, click Half Section.
4. In Half Section, click Topside Right .
5. Move the pointer. …
6. Drag the preview to the right and click to place the section view.

What are the 7 types of section views?

There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.

What are types of section?

6 Types of sectional views

• Full sections. …
• Half sections or views. …
• Offset sections or views. …
• Broken out sections or broken views. …
• Revolving sections or view. …
• Removed sections.