Your question: How do I center a circle in Solidworks?

How do you center a shape in Solidworks?

Click Tools > Align, and select a tool from the menu. Select a group of annotations, right-click one of the annotations, select Align, and choose one of the options.

How do you center a rectangle in a circle in Solidworks?

To sketch center rectangles:

1. Click Center Rectangle .
2. In the graphics area: Click to define the center. Drag to sketch the rectangle with centerlines. Release to set the four edges.
3. Click . Video: Sketching Center Rectangles.

How do I mark a center point in Solidworks?

To insert center marks automatically:

1. Click Center Mark. (Annotation toolbar) or Insert > Annotations > Center Mark. …
2. Under Auto Insert, select one or more: For all holes. …
3. Set the options for the auto insert choices.
4. Set the remaining options in the Center Mark PropertyManager.
5. Select one or more drawing views.
6. Click .

How do you align features in Solidworks?

Aligning Sketches

1. Select a line or a point in a sketch to be aligned with another sketch.
2. Hold Ctrl and select a line or a point in the second sketch to which the first sketch is to be aligned.
3. Click Align Sketch (2D to 3D toolbar), or click Tools > Sketch Tools > Align > Sketch.

How do I center a line in Solidworks?

To create a centerline:

1. Click Centerline (Sketch toolbar) or click Tools > Sketch Entities > Centerline.
2. Click to start the centerline.
3. Drag, or move the pointer and click, to set the end of the centerline.

How do you center a rectangle in a circle?

Move the cursor toward the center of the rectangle until you see the tracking lines from both midpoints cross each other at the rectangle’s center. Click to specify the circle’s center. At the Specify radius of circle or [Diameter]: prompt, specify the circle’s radius.

How do you move a circle in Solidworks?

To modify a circle in an open sketch by dragging:

1. Increase the perimeter by dragging its edge away from its center point.
2. Decrease the perimeter by dragging its edge toward its center point.
3. Move the circle by dragging its center point.

How do you draw a circle in Solidworks?

Circles

1. Sketch tab. Click the Sketch CommandManager to select circle tools from the Circle. flyout tool.
2. Menu. Click Tools > Sketch Entities to select circle tools.
3. Circle PropertyManager. Change to different circle tools from the Circle PropertyManager.

How do I center a hole in Solidworks?

In the Hole Alignment PropertyManager, select components to check and set the maximum acceptable hole center deviation. To open the Hole Alignment PropertyManager: Click Hole Alignment (Assembly toolbar) or Tools > Evaluate > Hole Alignment.

How do I remove a center mark in a Solidworks drawing?

Select Detailing from the Document Properties tab. Under Auto insert on view creation, select or clear the check box for: Center marks – holes -part.

…

Under Center marks:

1. Enter a value for Size. …
2. Enter a value for Gap. …
3. Select or clear the check boxes for Scale by view scale, Extended lines, and Centerline font.