You asked: What is a bearing fixture in Solidworks?

What is a fixture in Solidworks?

The Fixture PropertyManager allows you to prescribe zero or non-zero displacements on vertices, edges, or faces for use with static, frequency, buckling, dynamic and nonlinear studies. Contents.

How do you show loads and fixtures in Solidworks?

To display the dialog box, click Simulation > Options. On the Default Options tab, click Load/Fixture.

How do you simulate a bearing in Solidworks?

To define a bearing between the shaft and the housing, right-click Connections in the Simulation study tree and select Bearing. The exploded view shows a cylindrical split face of a shaft connected to a spherical face of the housing.

What type of study does SimulationXpress perform?

SimulationXpress uses the same simulation technology that SOLIDWORKS Simulation uses to perform stress analysis. More advanced simulation capabilities are available within the SOLIDWORKS Simulation line of products.

What does the split line feature do?

tool projects an entity (sketch, solid, surface, face, plane, or surface spline) to surfaces, or curved or planar faces. It divides a selected face into multiple separate faces.

How do you design a bearing?

Design characteristics:



Bearing 1 (working side) is axially fixed in the housing, bearing 2 is arranged axially movably (fixed seat of the inner rings on the shaft) The spring force on the outer ring of the bearing 2 ensures a constant preload for both bearings.

How does a journal bearing work?

In a journal bearing, the shaft rotates inside a loose-fitting bearing shell of softer, often porous, bearing material. Lubricant, such as oil, grease or a low-friction compound like PTFE or graphite is used between the surfaces. The shell is sometimes split into two halves.

What is the difference between roller and ball bearing?

A roller bearing is a cylindrical unit that is used to provide low-friction movement for a bushing or bearing block. A ball bearing is a spherical unit that accomplishes the same objective as a roller bearing. The real difference has to do with the contact surface between the bearing and the rail.

How do I create a fixture in SolidWorks?

To apply fixtures:

1. Click Add a fixture. The Fixture PropertyManager appears.
2. In the graphics area, select faces to fix.
3. Click . The fixture is added to the Fixtures folder in the SimulationXpress study tree and a check mark appears next to Fixtures in the SimulationXpress wizard. …
4. Click Next.

How do I load a SolidWorks simulation?

How to Use Load Cases in SOLIDWORKS Simulation

1. Step 1: The Plan. …
2. Step 2: Open the File. …
3. Step 3: Create a New Static Study. …
4. Step 4: Apply the Material as Aluminum 1060 Alloy. …
5. Step 5: Apply Fixtures. …
6. Step 6: Apply Loads. …
7. Step 7: Mesh the Model. …
8. Step 8: Open Up the Load Case Manager.

What is a requirement of doing analysis with SolidWorks FloXpress?

FloXpress must be purchased as an add-in. The part must have two open ends. The part must be fully closed. The part must be made of a metal.