You asked: How do you add threads in Solidworks?

How do you add threads in Solidworks 2020?

To create a cut thread:

1. Open a model with a cylindrical part and click Insert > Features > Thread .
2. In the graphics area, select a circular edge.
3. In the PropertyManager, under Specification, set values for the following: …
4. For Thread method, click Cut thread. …
5. Set the starting position of the Thread Location:

How do you show threads in Solidworks?

To do that, go to the Annotations tab and select ‘Model Items’. Then select a view and a ‘Destination view(s)’ section will appear with the desired view, and under ‘Annotations’ you will want to select the cosmetic thread icon (as shown in the picture below). Then you should be good to go!

Where is the thread tool in Solidworks?

The Thread Tool can then be found underneath the Hole Wizard Tool on the Features tab of the Command Manager, or in Insert>Features>Thread. Once the Thread Tool is selected the location of the thread needs to be specified by selecting a circular edge. Then the thread specification should be set.

How do you add threads in SolidWorks 2015?

If the feature is a conical boss, select the minor diameter. You can also select the feature after you click the tool. (Annotation toolbar), or click Insert > Annotations > Cosmetic Thread. Set the properties in the Cosmetic Thread PropertyManager .

How do you create a thread in Solidworks drawing?

First, create a cosmetic thread display on the model by going to Insert > Annotations > Cosmetic Thread.

1. Insert Cosmetic Thread. In the PropertyManager, specify a standard if you want (type and size as well). …
2. Cosmetic Thread Properties. …
3. Drawing includes Callout. …
4. Insert Callout in an existing drawing view.

How do I edit cosmetic threads in Solidworks?

Editing Cosmetic Threads

1. In a part or assembly document, right-click the Cosmetic Thread feature and click Edit Feature .
2. Make the necessary changes in the Cosmetic Thread PropertyManager, and click .

How do you add threads in Solidworks 2019?

To create a cut thread:

1. Open a model with a cylindrical part and click Insert > Features > Thread .
2. In the graphics area, select a circular edge.
3. In the PropertyManager, under Specification, set values for the following: …
4. For Thread method, click Cut thread. …
5. Set the starting position of the Thread Location: