You asked: How do I Revcloud in CAD?

How do you use Revcloud?

Creating a revision cloud using existing entities

1. On the ribbon, choose Annotate > Revision Cloud (in Markup).
2. On the menu, choose Draw > Revision Cloud.
3. On the Draw toolbar, click the Revision Cloud tool.
4. Type revcloud and then press Enter.

How do you scale Revcloud?

Type revcloud and then press Enter. 2 Choose Arc Length. 3 Enter the minimum length of the individual arcs that make up the revision cloud, then press Enter. 4 Enter the maximum length of the individual arcs that make up the revision cloud, then press Enter.

How do I change a Revcloud to a Polyline?

“Select a revision cloud you want to fix. Right-click and go to Polyline > Decurve. The revision cloud will change to a flattened polyline.

How do I cloud a PDF?

Choose Comment Menu > Drawing Tools > Draw Cloud.

…

Access the properties:

1. Click the Selection button first.
2. Click inside the area to highlight it and click Properties Button.
3. Or, click the edge shadow and double-click again.
4. Or, Key F4.

How do I make Revcloud bigger in Autocad?

Specify the default arc lengths to use in creating a revision cloud.

1. Click Home tab Draw panel Revision Cloud drop-down. Find.
2. In the drawing area, right-click and choose Arc length.
3. Specify a new minimum arc length.
4. Specify a new maximum arc length. …
5. Press Enter to continue with the command or Esc to end the command.

What are the two options for creating splines in AutoCAD?

A 1-degree spline results in a line; there is no bend. A 2-degree spline results in a parabola; there can be only one bend. A 3-degree spline results in a cubic Bezier curve; there can be two bends.

How do you make a hexagon in CAD?

The simplest way to draw a hexagon in AutoCAD is to use the polygon tool, entering six as the number of sides. If you know the radius you’d like to use, then you can choose to size the polygon from the center. You can then choose if you want the hexagon inscribed within the radius, or circumscribed outside the radius.

How do you draw an ellipse in AutoCAD?

Type el or ellipse on the command line or command prompt and press Enter. Type A or arc on the command line or command prompt and press Enter. Specify the endpoint or the center of the elliptical arc. Specify the end angle.