You asked: How do I create a multibody part in SolidWorks?

How do you make a multibody part in Solidworks?

Saving an Assembly as a Multibody Part

1. Open an assembly document.
2. Click File > Save As. The Save As dialog box appears.
3. Set the Save as type to Part (*. prt, *. …
4. Select one of the following: Exterior Faces to save the exterior faces as Surface Bodies . …
5. Select or clear the following: …
6. Click Save.

What is a multibody part in Solidworks?

A multibody part consists of multiple solid bodies that are not dynamic. If you need to represent dynamic motion among bodies, use an assembly. Tools such as Move Component, Dynamic Clearance, and Collision Detection are available only with assembly documents.

How do you make a part independent in Solidworks?

In an assembly, in the graphics area or FeatureManager design tree, right-click a component or Ctrl + select multiple components and click Make Independent . In the dialog box, click OK when asked to save the component with a new name.

How do I add a part to a part in Solidworks?

With a part document open, click Insert Part (Features toolbar) or Insert > Part. Browse to a part document and click Open. The Insert Part PropertyManager appears. Under Transfer, select any combination of items from the inserted part to be included in the derived part.

How do I make solid parts in Solidworks?

To convert a boundary surface into a solid, click Insert > Surface > Boundary Surface, and in Options and Preview, click Create solid. To convert a trim-surface feature into a solid, click Insert > Surface > Trim Surface and in Surface Split Options, click Create solid.

How do you create a body in Solidworks?

To convert features to bodies and surfaces:

1. Open an assembly file, such as the HousingAssy. …
2. In the FeatureManager design tree, right-click Housing and click Open Part . …
3. At the top of the FeatureManager design tree, right-click Housing and click Convert to Bodies.
4. In the dialog box: …
5. Click Window > HousingAssy.

How do I create a new body in Solidworks?

Grouping Bodies into Folders

1. Expand Solid Bodies in the FeatureManager design tree.
2. Right-click a solid body name, select Add to New Folder, and name the folder. The selected solid body is listed in the new folder. You can drag other bodies into the same folder, and create other new folders and subfolders.

How do you create a part in Solidworks 2020?

To create a part from a Toolbox component:

1. In the Design Library task pane, under Toolbox , expand the standard, category, and type of the component. …
2. Right-click the component and click Create Part.
3. In the PropertyManager, under Properties, specify property values. …
4. Click .

How do you isolate a body in Solidworks?

To isolate bodies:

1. Select the bodies to isolate.
2. Click View > Display > Isolate or right-click and select Isolate.
3. On the Isolate pop-up toolbar, you can click one of the following to change the Visibility of Removed Bodies: Transparent. …
4. When you are done working on the isolated bodies, click Exit Isolate.

How do I merge parts in a Solidworks assembly?

To add bodies together:

1. Click Combine. (Features toolbar) or Insert > Features > Combine.
2. In the PropertyManager, under Operation Type, select Add.
3. For Bodies to Combine, select the bodies to combine. You can select bodies in the graphics area or the Solid Bodies. …
4. Click Show Preview to preview the feature.
5. Click .

What is external reference in Solidworks?

An external reference is created when one document is dependent on another document for its solution. If the referenced document changes, the dependent document changes also. In an assembly, you can create an in-context feature on one component that references the geometry of another component.

How do I create a virtual part in Solidworks?

To make externally saved components virtual while inserting them into an assembly:

1. Do one of the following: …
2. In the PropertyManager, under Options, select Make Virtual.
3. Under Part/Assembly to Insert, select or browse to a component and click to place it in the graphics area. …
4. Click OK.

How do you make a subassembly flexible in Solidworks?

To make a subassembly flexible: Click a subassembly in the FeatureManager design tree and select Component Properties . In the dialog box, under Solve as, select Flexible, then click OK.

How do you make a mirror component independent in Solidworks?

Optionally, if you want to independently edit the features of the mirrored part without affecting the original part, under Link, click Break link to original part. You can also break the link to the original part later by listing the mirrored part’s external references and selecting Break All.