You asked: How do I change a line to a construction line in Solidworks?

How do you add a construction line in SolidWorks?

In the PropertyManager, you can convert solid line segments to construction lines by selecting For Construction in the PropertyManager. To add centerlines in a rectangle, select Add construction lines and select either From Corners or From Midpoints in the PropertyManager.

How do you change a linetype in SolidWorks?

To change the format of an existing edge or sketch entity:

1. Select the edge or sketch entity you want to change. To select more than one entity at a time, hold Ctrl as you select.
2. Click a tool on the Line Format toolbar and select a format from the menu. The new format is applied to the selected entities.

What type of line is only used for construction in SolidWorks?

In a sketch that is in a SolidWorks part file, a sketch entity (lines and circles are the most common ones) with a centerline linetype are always considered construction geometry.

How do you line a construction line?

Create a Construction Line by Specifying Two Points

1. Click Home tab Draw panel Construction Line. Find.
2. Specify a point to define the root of the construction line.
3. Specify a second point through which the construction line should pass.
4. Continue to specify construction lines as needed. …
5. Press Enter to end the command.

What does for construction mean in SOLIDWORKS?

You can convert sketch entities in a sketch or drawing to construction geometry. Construction geometry is used only to assist in creating the sketch entities and geometry that are ultimately incorporated into the part. Construction geometry is ignored when the sketch is used to create a feature.

How do I draw a line in SOLIDWORKS drawing?

To sketch a line:

1. Click Line. …
2. In the Insert Line PropertyManager under Orientation, select one of the following: …
3. Under Options, select: …
4. Under Parameters, you can do the following, based on the Orientation: …
5. Click in the graphics area and sketch the line. …
6. Complete the line in one of the following ways:

How do I remove a construction line in Solidworks?

To hide or show edges in a drawing:

1. Click Hide/Show Edges. …
2. Select the edges to hide (you can select edges individually, or use box selection), then click . …
3. To show edges, click Hide/Show Edges. …
4. Select the hidden edges highlighted in orange, (you can select edges individually, or use box selection), then click .

How do you change the line width in Solidworks?

To set line thickness:

1. In a drawing, click Tools > Options > Document Properties > Line Thickness.
2. In the dialog box, under Line thickness print settings, enter a value for the line weights (Thin, Normal, Thick, and five additional line thickness settings). …
3. Click OK.

What are construction lines?

Construction lines (also known as xlines) are temporary linework entities that can be used as references when creating and positioning other objects or linework. For example, you can use construction lines to prepare multiple views of the same item, or create temporary intersections to serve as object snaps.

How do you centerline in SOLIDWORKS?

To create a centerline:

1. Click Centerline. (Sketch toolbar) or click Tools > Sketch Entities > Centerline.
2. Click to start the centerline.
3. Drag, or move the pointer and click, to set the end of the centerline.

What is center line SOLIDWORKS?

Centerlines are annotations that mark circle centers and describe the geometry size on drawings. You can insert centerlines into drawing views automatically or manually. The SOLIDWORKS software avoids duplicate centerlines. If you dimension to a centerline, the extension lines are shortened automatically.

How do you add a construction line in CAD?

Angle Construction Line

1. Click on the Construction Line icon, as shown in the below image: Or. Type XL on the command line and press Enter.
2. Type A on the command line or command prompt and press Enter. Or. Select Ang option on the command line. …
3. Specify the angle of XLine (Construction line). For example, 30.

What is the shortcut for construction line?

Step 3: Or you can use short cut command for the construction line, which is type XL, then press enter button of the keyboard and your command will be active.

How do I turn a line into a construction line in Creo?

Use the Convert To > Geometry and Convert To > Construction commands on the shortcut menu to toggle 2D geometry into construction entities, or vice versa.