Why won’t my lines join in Civil 3D?

How do you join lines in Civil 3D?

To Join Feature Lines

1. Click Modify tab Edit Geometry panel Join Find.
2. Select the feature line you want to join other lines to.
3. Select the joining object or enter Multiple to make a selection of multiple feature lines, polylines, or 3D polylines.

How do you join two polylines in Civil 3D?

To Join Polylines, Splines, Lines, and Arcs Into a Single…

1. Click Home tab Modify panel Edit Polyline. Find.
2. Select a polyline, spline, line, or arc to edit. …
3. Enter j (Join).
4. Select one or more polylines, splines, lines, or arcs that are located end to end.
5. Press Enter to end the command.

Why won’t my lines join in Autocad?

Causes: Objects have gaps or do not have connecting points because of different elevations. Use the UNITS command and increase the precision to maximum. Examining the lines, the Properties palette will show Start Z / End Z or Elevation values, potentially of a minute amount.

Can a polyline be left open?

Yes a polyline can be left opened.

How do you convert lines and arcs to polylines?

Converting Line to Polyline



Type PE on the command line and press Enter to start polyline edit command, the command line will prompt you to select objects for making changes. Click on the object which you want to change to polyline, you can also select multiple objects by selecting Multiple from the command prompt.

How do I create a join in AutoCAD?

Steps to join any object

1. Select the Join command from the ribbon panel under the Modify interface. Or. Type J or join on the command line and press Enter.
2. We need to select multiple objects to join. The selected objects are joined at once.
3. Press Enter.

What does Ltscale do in AutoCAD?

Linetype scale (LTSCALE) determines the scale and appearance of dashed lines as they appear in your drawing. This setting becomes especially important when you go to plot, since lines that appear dashed in Model Space may appear solid in Paper Space if their LTSCALE isn’t exactly correct.

What is Pedit in AutoCAD?

Edits polylines, objects to be joined to polylines, and related objects. Find. Common uses for PEDIT include joining 2D polylines, converting lines and arcs into 2D polylines, and converting polylines into curves that approximate B-splines (spline-fit polylines).

What’s the opposite of explode in AutoCAD?

There is no “unexplode”: you can use BLOCK command or BEDIT command to make a new block. Hi, the command you are looking for is “join”, it will connect all the lines you select. To execute this command you need to turn all the lines you want to join into polylines if they aren’t already.

How do you join two lines?

It’s possible to use two phone lines without using a two line phone, but you have to either rewire your wall jacks or purchase a two-line splitter. These devices plug into a standard two-line jack and split the line, directing the first line to one jack and the second line to the other jack.