Which choice is not a 3D view in Solidworks?

Which choice is a standard 3D view in Solidworks?

The Standard 3 View option under Insert > Drawing View creates three related default orthographic (front, right, left, top, bottom, and back) views of a part or assembly displayed at the same time. The view orientations used are based on the orientations (Front, Right, and Top) in the part or assembly.

How do I view 3D in Solidworks?

To access the 3D Views tab, click the 3D Views tab at the bottom of the SOLIDWORKS window: A resizable pane appears at the bottom of the screen. It includes 3D View controls that let you: Capture 3D views.

What are the standard three views in a drawing?

Standard views typically include the 3 principle views – front, top, right side. There are several methods for generating the standard drawing views.

What is model view in Solidworks?

Model View creates a single view based on a predefined view orientation. The Model View PropertyManager appears when you create a new drawing, or when you insert a model view into a drawing document.

How do I save a 3D view in Solidworks?

At the bottom of the SOLIDWORKS window, on the 3D Views tab, click Capture 3D View. Click Capture 3D View (MBD CommandManager or toolbar).

How do you get Trimetric view in Solidworks?

Click Tools > Customize and select or clear Use Large Tooltips to enable or disable the view previews. flyout button in the Orientation dialog box to select axonometric (isometric, dimetric, or trimetric) views and to set which type of axonometric view is displayed when you select a View Selector corner.

What are the views in drawing?

Types of Drawing Views

• Base View. The first view created in a drawing. …
• Projected View. An orthographic or isometric view that is generated from a base view or other existing view. …
• Auxiliary View. A view projected perpendicular to a user-selected line or edge. …
• Section View. …
• Detail View. …
• Overlay View. …
• Draft View.

What is the 7 views of an object?

Front, top, right side, left side, rear, and bottom. True or False? There are an unlimited number of possible directions for an auxiliary view, depending on the angle of features within an object. You just studied 10 terms!

How do you make a model view in Solidworks?

To insert a model view into a drawing:

1. Click Model View. (Drawing toolbar) or Insert > Drawing View > Model.
2. Set options in the Model View PropertyManager. …
3. Click Next . …
4. Set additional options in the Model View PropertyManager. …
5. Click .

How do you use alternate position view?

Insert a model view of the assembly using the orientation needed for the Alternate Position View. Position the assembly in its starting position. (Drawing toolbar), or click Insert > Drawing View > Alternate Position. The Alternate Position PropertyManager appears.

How do I view sections in Solidworks?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.