How do I change thickness in Solidworks?
To set line thickness:
- In a drawing, click Tools > Options > Document Properties > Line Thickness.
- In the dialog box, under Line thickness print settings, enter a value for the line weights (Thin, Normal, Thick, and five additional line thickness settings). …
- Click OK.
How do you add material thickness in Solidworks?
In the dialog box:
- Right-click Custom Materials and click New Category.
- Right-click New Category and click New Material.
- Set the custom material properties on each tab as required.
- Click the Sheet Metal tab. …
- Select Thickness Range.
- Click Add twice.
- For each row in the table, set the following: …
- Click Apply and Close.
Where are surface tools solidworks?
Surface tools are available on the Surfaces toolbar.
How do you make a lofted surface in SOLIDWORKS?
To create a lofted surface:
- Create a plane for each profile section of the loft. The planes do not need to be parallel.
- Sketch the section profiles on the planes. …
- If necessary, create guide curves. …
- Click Lofted Surface (Surfaces toolbar) or Insert > Surface > Loft.
- Set the PropertyManager options. …
- Click OK .
What are the commonly used Tools in SOLIDWORKS surface?
SOLIDWORKS tools you can use to create complex geometry include:
- Boundary Boss/Base (Features toolbar). …
- Deform (Features toolbar). …
- Indent (Features toolbar). …
- Flex (Features toolbar). …
- Wrap (Features toolbar). …
- Replace Face (Surfaces toolbar). …
- Intersection Curve (Sketch toolbar). …
- Composite Curve (Curves toolbar).
How do I add a surface toolbar in SOLIDWORKS?
To display SOLIDWORKS toolbars: Right-click in the window border, click Toolbars, and select or clear a toolbar name. Click Tools > Customize.
How do you make a part thinner in Solidworks?
To scale a solid or surface model: In a part document, click Scale (Features toolbar) or Insert > Features > Scale .
How do you use the shell tool in Solidworks?
The Solidworks shell tool is located in both features commandmanager and Insert menubar.
…
How to Use Solidworks Shell Tool
- Step 1: Create New Part File. Open Solidworks CAD software and create new part file. …
- Step 2: Create Rectangle Box. …
- Step 3: Select SolidWorks Shell Tool. …
- Step 4: Apply Solidworks Shell Tool.
How do you use boundary surfaces in Solidworks?
To create a boundary surface feature, click Boundary Surface (Surface toolbar) or Insert > Surface > Boundary Surface, set the PropertyManager options, then click . Curve callouts colors match those used in the PropertyManager. Click callouts to change the Tangent Type.