Where is axis of revolution in SolidWorks?

How do you revolve in SolidWorks?

To create a revolved surface:

1. Sketch a profile and a centerline around which to revolve the profile.
2. Click Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.
3. Set the PropertyManager options.
4. Click OK .

How do you create a Revolve base in SolidWorks?

Creating Revolve Features

1. Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
2. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.
3. Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.

How do I select an axis in SolidWorks?

Creating Reference Axes

1. Click Axis on the Reference Geometry toolbar, or click Insert > Reference Geometry > Axis.
2. Select the axis type in the Axis PropertyManager, then select the required entities for that type.
3. Verify that the items listed in Reference Entities correspond to your selections.
4. Click .

What is extruded boss in SolidWorks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

How do you rotate the y axis in SolidWorks?

Rotates the model view in part and assembly documents. Click Rotate View (View toolbar) or View > Modify > Rotate then drag the pointer . Drag with the middle mouse button.

What is revolved boss in SolidWorks?

Revolved Boss or Base is a SolidWorks feature tool which is used to create solid 3D model around an axis. You can revolve the sketch around an axis to add materials to it. You can access revolved boss/base from both command manager and menubar.

How do you make a revolve?

To view the revolve, open a 3D view.

…

Use the Draw tools to sketch a shape to revolve around the axis:

1. Click Modify | Create Revolve tab Draw panel (Boundary Line).
2. To create a single revolve, sketch a closed loop.
3. To create more than one revolve, sketch multiple, non-intersecting, closed loops.

How do you add an axis in SolidWorks?

Creating Reference Axes

1. Click Axis. on the Reference Geometry toolbar, or click Insert > Reference Geometry > Axis.
2. Select the axis type in the Axis PropertyManager, then select the required entities for that type.
3. Verify that the items listed in Reference Entities. …
4. Click. …
5. Click View > Hide/Show > Axes to see the new axis.

How do you use revolve Extrude in SolidWorks?

Creating Extruded or Revolved Cuts as Assembly Features

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

Why can’t I revolve SolidWorks?

Unless you’re creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Try using an Extruded Boss/Base to check whether your profile is closed.

What is loft in SolidWorks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

How do you make a lofted base in SolidWorks?

To create lofts:

1. Do one of the following: Click Lofted Boss/Base (Features toolbar) or Insert > Boss/Base > Loft. Click Lofted Cut (Features toolbar) or Cut > Loft > Insert. Click Lofted Surface (Surfaces toolbar) or Insert > Surface > Loft.
2. Set the options in the PropertyManager.
3. Click .

How do you make a cone in SolidWorks?

To create a cone:

1. Click Solids > Draw > Cone (or type Cone).
2. Set an option for the cone’s base: Center point base: Click in the graphics area to specify a center point or type the 3D coordinates. …
3. Set the cone height: Click in the graphics area or type a value. – or –