What is the use of cut part by sketch plane in Catia?

How do you cut pieces in CATIA?

Cutting the Part by the Sketch Plane

1. Double-click Sketch. 2 from the geometry. …
2. Move the sketch so that you can see the whole part.
3. Click Cut Part by Sketch Plane from the Visualization toolbar.

How do you use planes in CATIA?

Through three points

1. Click Plane . The Plane Definition dialog box appears.
2. Select the Through three points plane type.
3. Select three points. A plane passing through the three points is displayed. You can move it simply by dragging it to the desired location.
4. Click OK to create the plane. The plane (identified as Plane.

What are sketch planes?

Construction geometry consisting of a flat surface. Planes can be used for a 2D sketch, section view of a model, a neutral plane in a draft feature. from the context menu. Mouse over any existing geometry to display existing planes. Click to select the highlighted plane and display the sketch grid.

How do I cut an assembly in Catia?

Reusing Assembly Design Splits



In this case, you just need to select the existing assembly split, click the Assembly Split icon and then select a face. Only the Assembly Features Definition dialog box appears to let you determine the parts of interest.

How do I create a cross section in Catia?

To gain access to the Sectioning tool, CATIA users will need to add the Sectioning tool into their 3DCS workbench. With a model open, start the Sectioning tool. The Sectioning Definition will appear. In the Positioning tab, the user can specify the section plane direction in either X, Y, Z directions.

What is split and trim in Catia?

The main difference between these two commands is that Split is only cutting specific surfaces while Trim will cut all surfaces involved in the operation.

Where is plane option in Catia?

Select the Tools -> Multi View -> View Plane Definition command from the menu bar. The Plane Definition dialog box appears. 3. Enter the desired options from the dialog box ( Isometric ).

How do you change planes in Catia?

To change the size of the reference planes in CATIA, go to Tools menu > Options. In the Options dialog box under Infrastructure > Part Infrastructure, click on the Display tab. Under Display in Geometry Area the size of the planes is controlled by the scroll bar next to the Axis system display size (in mm) field.