What is the difference between reference plane and reference line in Revit?

What is the difference between reference planes and reference lines? A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry. A Reference Line creates a line similar to a reference plane, but that has logical start and end points.

What is reference line in Revit?

Create a reference line that you can use when creating model geometry, or to create constraints for the geometry. In the Family Editor, you can add a reference line in any view and use the same drawing tools and techniques used when adding model lines. When you sketch a reference line, it displays as a single line.

How do you reference lines in Revit?

Use the Line tool or the Pick Line tool to draw a reference plane.

1. On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane) …
2. To draw a line: On the Draw panel, click (Line). …
3. To pick an existing line: On the Draw panel, click (Pick Lines).

How do I find reference planes in Revit?

With the reference planes selected, there is a Subcategory panel on the Modify|Reference Planes contextual ribbon. Expand the Subcategory: drop-down and select Major Reference. When you deselect the reference planes, you can see that they are now green.

What is reference line?

Reference Lines allow you to place lines on the plot at specific locations to mark important values. You could use these to mark control limits or to indicate a trend line for a set of data.

How do you create a reference plane in Revit 2020?

Add a Reference Plane

1. On the Draw panel, click (Pick Lines).
2. On the Options bar, specify an offset, if desired.
3. Select the Lock option to lock the reference plane to the line.
4. Move the cursor near the line to which you want to place the reference plane and click.

How do I create a reference level in Revit family?

Add Levels

1. Open the section or elevation view to add levels to.
2. On the ribbon, click (Level). Architecture tab Datum panel (Level) …
3. Place the cursor in the drawing area and click. …
4. Draw level lines by moving the cursor horizontally. …
5. Click when the level line is the correct length.

What is reference line in architecture?

While Reference Lines are used as control lines for information within a family similar to Reference Planes, they are not a type of Reference Plane. It is its own type of object designed for a separate purpose. … Reference Lines are created from the Datum panel of the Create tab within the Revit Family Creator.

How do you move a reference plane in Revit?

Use this tool to select a new work plane that is parallel to the existing work plane.

1. Select a work plane-based element in a view.
2. Click Modify | <Element> tab Work Plane panel (Edit Work Plane). …
3. In the Work Plane dialog, select another work plane. …
4. If needed, reposition the element on the work plane.

What are the different types of reference planes?

1.1 shows the three standard reference planes: the medial (mid-sagittal), the frontal (or coronal), and the transverse planes, all at 90 degrees to each other and usually set to meet in the center of mass of the whole body.

What is the use of reference plane in Revit?

Use the Reference Plane tool to draw reference planes to use as a guideline in your design. Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model.

What is reference plane in PCB?

The most ideal return path for a signal in a circuit board is a large area of metal, or a plane layer, which becomes the reference plane. Usually, this will be a ground plane, and it needs to be on an adjoining layer to the signal trace with a layer of dielectric between them.

How do I delete a reference plane in Revit family?

Drag the dimension away from the ref plane and place it on the other side of your boundary lines to remove it (you can’t hit delete. Too easy). Now there are no dimensions to the ref plane from the sketch. And there you have it, the geometry is no longer associated with the ref plane.

How do you set a work plane?

Set the Work Plane of a View

1. On the ribbon, click (Set). Architecture tab Work Plane panel (Set) …
2. In the Work Plane dialog, under Specify a new Work Plane, select one of the following options: …
3. If the selected plane is perpendicular to the current view, the Go to View dialog opens.

What is a Revit work plane?

A work plane is a virtual 2-dimensional surface used as the origin for a view or for sketching elements. Work Plane Set or Show or Viewer. on the Architecture, Structure, or Systems tab in projects. on the Create tab of the Family Editor.