What is spot elevation in Revit?

A spot elevation displays the actual elevation of a selected point. Use spot elevations to obtain points of elevation for ramps, roads, toposurfaces, and stair landings. You can place spot elevations on non-horizontal surfaces and non-planar edges. You can place them in plan, elevation, and 3D views.

How do you place a spot elevation in Revit?

Help

1. Click Annotate tab Dimension panel (Spot Elevation).
2. In the Type Selector, select the type of spot elevation to place.
3. On the Options Bar, do the following: Select or clear Leader. …
4. Select an edge of an element, or select a point on a toposurface. …
5. If you are placing a spot elevation: …
6. To finish, press Esc twice.

What are spot elevation used for?

Spot elevation: A point on a map where height above mean sea level is noted, usually by a dot and elevation value; it is shown wherever practical (road intersections, summits, lakes, large flat areas and depressions).

How do you find the elevation of a spot?

An easy-to-remember equation for finding change in elevation as a decimal is “rise over run,” meaning the rise (the change in vertical distance) divided by the run (the change in horizontal distance). As an example, let’s say the rise is 2 and the run is 6. So, you’d take 2 over 6 (or 2/6) to get .

How do I change the elevation level in Revit?

Change the level name: Select the level and click the name box. Enter a new name for the level. Change the elevation: Select the level line, and click the elevation value. Enter a new value.

What is a spot grade?

Spot Elevations / Spot Grades: Spot grades identify the exact elevation of a point on the surface, or of a level flat area. located upon the surface. Typically spot grades are taken to and shown as to the.

What is a contour interval on a map?

Individual contour lines on a topographical map are a fixed interval of elevation apart known as a contour interval. Common contour intervals are 5, 10, 20, 40, 80, or 100 feet. The actual contour interval of a map depends upon the topography being represented as well as the scale of the map.

What is a 2% grade?

Table of Common Slopes in Architecture

How do you read elevations?

To find an elevation, simply set the rod foot at any location on the job within the range of your laser or optical instrument. Run the detector and / or front rod section up or down until you pick up the “on grade” signal from your detector. Read the number opposite the pointer. That number is your true elevation.

How do you change the spot elevation family in Revit?

Create/modify types gives you the option of creating a custom spot elevation. When selected, the Family Type Properties dialog opens to edit the spot elevation tag.