What is split face in Revit?

The Split Face tool splits the selected face of the element; it does not change the structure of the element. You can use Split Face on any non-family instance. After splitting the face, you can use the Paint tool to apply a different material to this section of face. See Applying a Material to the Face of an Element.

How do I use the Split tool in Revit?

Split Elements

1. Click Modify tab Modify panel (Split Element).
2. If desired, on the Options Bar, select Delete Inner Segment. When you select this option, Revit removes the segment of the wall or line between selected points.
3. Click the element at the point you wish to split.

How do you split a wall in Revit?

Split Walls Horizontally

1. Click Modify tab Modify panel (Split Element).
2. Place the cursor on the wall or line at the point you wish to split. Note: A stacked wall can only be split vertically. …
3. Click to place the split. A permanent horizontal line displays on the wall indicating the split.

How do you split a floor in Revit?

Revit doesn’t support to split floors directly, here’s an enhancement in idea: Split Floors, you can refer following workaround：

1. Create parts.
2. Divide them and add relevant elements to the part.
3. Add everything in the assembly and use shop drawing command.

How do you split a generic model in Revit?

Dividing Parts by Reference

1. In the drawing area, select the part or parts to be divided.
2. Click Modify | Parts tab Part panel (Divide Parts).
3. If you want a gap between the parts resulting from this division, enter a positive value for the Divider gap parameter on the Properties palette, under Constraints.

What is a split wall?

You can split a wall along a horizontal line in an elevation or a 3D view. After you split a wall, Revit LT treats it as 2 separate walls, which means that you can modify one part independently of the other.

How do you create parts in Revit?

Click Modify tab Create panel (Create Parts). In the drawing area, select the elements from which you want to create parts. Only elements that are eligible for part creation will be selectable when the tool is active; ineligible elements display in half-tone. Press Enter or the Spacebar to complete the action.

How do you split a slab in Revit?

Split a Roof or Structural Floor

1. Select the floor to modify.
2. Click Modify | Floors tab Shape Editing panel Add Split Line.
3. Select a vertex, edge, face or point anywhere on the structural floor to start the split line. …
4. Select another vertex, edge, face or point anywhere on the floor to end the split line.

What is parts in Revit?

Part elements in Revit support the construction modeling process by letting you divide certain elements from the design intent model into discrete parts. … Parts can be used by construction modelers to plan delivery and installation of pieces of more complex Revit elements.