How do you bend sheet metal in SolidWorks?
To create a sketched bend feature:
- Sketch a line on a planar face of the sheet metal part. …
- Click Sketched Bend. …
- In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
- Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .
How do you use a swept flange?
Creating Swept Flanges
- Sketch an open, non-intersecting profile on a plane or face.
- Create a path for the profile to follow. You can use a sketch or a series of existing sheet metal edges. …
- Click Swept Flange. …
- In the graphics area: …
- Set options in the PropertyManager, then click .
What does the rip command do in SolidWorks?
A rip feature is commonly used to create sheet metal parts, but you can add a rip feature to any part.
How do you flex in Solidworks?
To create Flex features, click Flex (Features toolbar) or Insert > Features > Flex, set the PropertyManager options, and click .
…
Repositioning the Triad and Trim Planes
- Select a coordinate system feature .
- Change the Rotation Origin. , …
- Change the Rotation Angle , , or to rotate the triad around these axes.
How do you bend a command in Solidworks?
Using Insert Bends to Add a Body
- In a sheet metal part, select or create a plane and draw a profile sketch.
- Click Extruded Boss/Base (Features toolbar).
- In the PropertyManager: Set the direction and depth of the extrusion. …
- Click Insert Bends. (Sheet Metal toolbar) or Insert > Sheet Metal > Bends .
- In the PropertyManager:
How do I roll a part in Solidworks?
Rolls the model view in part and assembly documents. Click Roll View (View toolbar) or View > Modify > Roll, then drag the pointer left or right. Hold down Alt and drag with the middle mouse button. Hold down Alt and press the left-right arrow keys.
What is a lofted bend?
Lofted bends in sheet metal parts use two open-profile sketches that are connected by a loft. The Base-Flange feature is not used with the Lofted Bend feature. Begin with two open profile sketches. Use Lofted Bends to create a solid feature.
What is rip sketch?
When a rip is required to create a sheet metal part, you can use 2D and 3D sketches to define the rip. You must create the sketch before converting the solid body to a sheet metal part. To use a rip sketch when converting to sheet metal: Open the part.
What is sheetmetal rip?
• Edge Rip—Tears the sheet metal along an edge. You can define edge treatment for the ripped edges. • Surface Rip—Cuts out an entire surface patch from the model and removes volume from the model.
What is Miter flange in Solidworks?
A miter flange feature adds a series of flanges to one or more edges of a sheet metal part. The sketch for a miter flange must adhere to the following requirements: The sketch can contain lines or arcs. If you use an arc to create a miter flange, the arc cannot be tangent to the thickness edge.
How do I create a hem in Solidworks?
on the Sheet Metal toolbar, or click Insert > Sheet Metal > Hem. In the graphics area, select the edges where you want to add a hem. In the PropertyManager, under Edges: Click Edit Hem Width to edit the sketch of the profile.
How do you close a corner in Solidworks?
Click Closed Corner (Sheet Metal toolbar) or Insert > Sheet Metal > Closed Corner. Select one or more planar faces for Faces to Extend . The SOLIDWORKS software attempts to find the Faces to Match . If matching faces are not found, you can manually select the Faces to Extend and Faces to Match.