What is halftone and underlay in Revit?

What is an underlay in Revit?

When you set an underlay, Revit displays another level of the model at the view’s cut plane under the current plan view. The underlay can be viewed from above or below the current level. The underlay appears in halftone and is visible in a hidden line view.

What is underlay orientation in Revit?

When Underlay Orientation is set to Look down, the underlay displays as if you are viewing it from above, like a plan view. When the Underlay Orientation is set to Look up, then the underlay displays as if you are viewing it from below, like a reflected ceiling plan.

How do I show below level in Revit?

Solution:

1. In plan view, click View menu > View Properties.
2. Click the Edit button for the View Range parameter.
3. Enter a value for both the Bottom Offset, under Primary Range, and the Level Offset, under View Depth, that is more than 4 feet from the floor or slab.

What is view depth in Revit?

View depth is an additional plane beyond the primary range. Change the view depth to show elements below the bottom clip plane. By default, the view depth coincides with the bottom clip plane.

How do I make properties visible in Revit?

My properties window has disappeared, how do I get it back? Right-click and select Properties from the right-click window, or from the Ribbon View (Tab) > Window > User Interface > tick on Properties.

How do I change the view range in Revit?

Modify the View Range

1. Open a plan view.
2. On the Properties palette, locate the View Range parameter, and click Edit. Alternatively, enter VR on the keyboard.
3. In the View Range dialog, modify view range properties as necessary. …
4. Click Apply to view changes.

How do you filter by phase in Revit?

To specify different graphic overrides for each phase status:

1. Click Manage tab Phasing panel (Phases).
2. In the Phasing dialog, click the Phase Filters tab.
3. Click New to insert a new phase filter. …
4. Click in the Filter Name box to edit the name (optional).

What is phasing in Revit?

A phase filter is a rule that you apply to a view to control the display of elements based on their phase status: new, existing, demolished, or temporary. About Infill Elements for Phasing. Infill elements occur when a hosted element and its host do not have the same values for Phase Created and Phase Demolished.

How do you create a phase in Revit?

Create a Phase

1. Click Manage tab Phasing panel (Phases). The Phasing dialog opens, displaying the Project Phases tab. …
2. Click the number box adjacent to a phase. Revit selects the entire phase row. …
3. Insert a phase. …
4. If desired, click the Name text box of a phase to rename it. …
5. Click OK.