What is Fillet command in Solidworks?

How do I use fillet command in Solidworks?

To create fillets:

1. Click Fillet on the Features toolbar, or click Insert, Features, Fillet/Round.
2. Set the PropertyManager options. For constant radius fillets only, you can use the FilletXpert to add or modify fillets and to manage fillet corners.
3. Click OK .

What does the Fillet feature do?

Fillet feature dialog box



Adds fillets or rounds to one or more edges of a part, between two face sets, or between three adjacent face sets.

What is sketch fillet?

The Sketch Fillet tool trims away the corner at the intersection of two sketch entities to create a tangent arc. This tool is available for both 2D and 3D sketches. The Fillet tool on the Features toolbar fillets entities such as edges in parts.

How do you fillet a 3D object in Solidworks?

To fillet multiple edges of a 3D solid using the Chain option:

1. Click Solids > Solid Editing > Fillet edges (or type FilletEdges).
2. Specify the Radius option.
3. Specify the radius of the fillet arc.
4. Specify the Chain option.
5. Specify an edge tangent to an existing fillet on a 3D solid. …
6. Press Enter.

What does the Shell feature do in Solidworks?

The shell tool hollows out a part, leaves open the faces you select, and creates thin-walled features on the remaining faces. If you do not select any face on the model, you can shell a solid part, creating a closed, hollow model . You can also shell a model using multiple thicknesses.

What are the fillet types in Solidworks?

Types of Fillets

How do you fillet a circle in Solidworks?

Select the edge, and go to Insert > Features > and select Fillet/Round. In the property manager under Fillet Type, click Constant Size Fillet. Next, under Items to Fillet, select both Tangent Propagation and Full Preview. Under Fillet Parameters, select Symmetric in the drop down list and then set the radius to 40 mm.

How do you reverse a fillet in Solidworks?

Make surface fillets with hold lines. Trim or keep the filleted surfaces in a face fillet. Make a variable radius fillet on a surface. Click Reverse Face Normal for a face set to reverse the fillet direction.

How do I fillet an edge in Solidworks?

Creating Partial Chamfers and Fillets

1. Under Chamfer Type, click Offset Face .
2. Select Full preview.
3. Select Partial Edge Parameters.
4. In Start condition, select Distance offset.
5. Set Offset distance from start point to 20 mm.
6. In End condition, select Distance offset.

What is the difference between a chamfer and a fillet?

Fillets describe rounded corners of a design (or part) that help to reduce stresses and prevent rapid deformation at the corners of the part. In contrast, chamfers are sloped or angled edges (usually at 45° or 60° ) of a design or part.

How do you use the shell tool in Solidworks?

Click Shell (Features toolbar) or Insert > Features > Shell. In the PropertyManager, under Parameters: Some fields that accept numeric input allow you to create an equation by entering = ( equal sign) and selecting global variables, functions, and file properties from a drop-down list.

How do you fillet multiple bodies in Solidworks?

To create multiple fillets using the FilletXpert Add tab: In the FilletXpert PropertyManager, click the Add tab.

…

Creating Multiple Fillets

1. Select items to fillet for Edges, Faces, Features and Loops .
2. Set the Radius .
3. Click Apply. The FilletXpert adds the fillet features without leaving the PropertyManager.