What is broken out section view in Solidworks?

What is a broken-out section?

A broken-out section is part of an existing drawing view, that is used to remove material to a specified depth in order to expose inner details of a model. A closed profile, usually a spline, defines the broken-out section.

What are the different views in SolidWorks?

You can generate drawings of a part or assembly in a variety of view types: Standard 3 View, Model, and Relative views. The part or assembly document must be saved before you can create drawing views of it.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

What is a removed section view?

The removed section view is a zero-thickness slice through the model showing only cut edges and hatching perpendicular to the cutting line. That’s different than the traditional section view, which is projected parallel to the cutting line.

How do I edit a broken view in Solidworks?

Right-click the broken view, and select Un-Break View. The break lines remain in the view and you can delete them. To modify a broken view: To change the shape of the break lines, right-click a break line and select a style from the shortcut menu.

How do you break out a section in Solidworks?

To create a broken-out section:

1. Click Broken-out Section. (Drawing toolbar), or click Insert > Drawing View > Broken-out Section. …
2. Sketch a profile.
3. Set options in the Section View dialog box. …
4. Set options in the Broken-out Section PropertyManager. …
5. Click .

How do I view sections in Solidworks?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.

How do you break a view in Solidworks?

To create a break view:

1. Select a drawing view and click Break. (Drawing toolbar) or click Insert > Drawing View > Break.
2. Set options in the PropertyManager: Option. …
3. Click in the view twice to place two break lines, creating the break. …
4. Add additional break lines as necessary. …
5. Click .

What is a section view?

What is a section view? A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views.

What are the 7 types of section views?

There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.

When and why is a section view necessary?

In which case, the direction of sight is towards one half of the object. The other half is then mentally discarded. Drafters use sectional views to improve the clarity of complex objects when internal surfaces result in too many hidden lines. Special conventions are used to make a sectional view easy to understand.

How do you delete a section view in Solidworks?

To delete views:

1. Right-click anywhere in a drawing view and select Delete.
2. Click Yes to confirm the deletion. If you delete a detail or section view, select Delete detail sketch or Delete section sketch so the sketch used to create the view is also deleted.

What is offset section?

An offset section is a means of including in a single section several features of an object that are not in a straight line. To do this, the cutting plane line is bent, or “OFFSET” to pass through the features of the part.

How do you delete a section line in Solidworks?

To edit existing section views with Section View Assist: Right-click on an existing section view or its cutting line and click Edit Cutting Line.