What does section view do in Solidworks?

What is the point of a section view?

A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views. By taking an imaginary cut through the object and removing a portion, the inside features may be seen more clearly.

What is a sectional view?

A sectional view represents the part of an object remaining after a portion is assumed to have been cut and removed. The exposed cut surface is then indicated by section lines. Hidden features behind the cutting plane are omitted, unless required for dimensioning or for definition of the part.

What is the purpose of section view in Autocad?

Section views are used in Mechanical and Architectural drafting. Anytime you need to show some detail that isn’t readily seen from an exterior view, “cut it up” and draw it.

What are the 7 types of section views?

There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.

What are section lines used for?

Section Lines: Used to indicate where the cutting plane cuts the material. Section lines are thin and the symbols (type of lines) are chosen according to the material of the object. Section lines are generally drawn at a 45° angle.

When should a full section be used?

Full sections



This type of section is used for both detail and assembly drawings. When the cutting plane divides the object into two identical parts, it is not necessary to indicate its location.

What is full section?

Full Sections



When a cutting plane line passes entirely through an object, the resulting section is called a full section Fig. 7 illustrates a full section. It is possible to section an object whenever a closer look intentionally is desired.

How do I view sections in Solidworks?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.

What does a section drawing show?

A ‘section drawing’, ‘section’ or ‘sectional drawing’ shows a view of a structure as though it had been sliced in half or cut along another imaginary plane.

What is Section in CAD?

The SECTION command creates a region object that represents a 2D cross section of 3D objects, including 3D solids, surfaces, and meshes. This method does not have the live sectioning capabilities that are available for section plane objects that are created using the SECTIONPLANE command.

What are the different types of section?

Examples of different Section Types and how to use them

• Headline.
• Row section.
• Columns section.
• Buttons section.
• Text + Buttons section.
• Grid section.
• Side-by-Side section.
• Tabs section.

How do I create a section view in Solidworks assembly?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.