What does Rebuilding do in SOLIDWORKS?

What is rebuild error in Solidworks?

With Stop or Prompt, the rebuild action stops for each error so you can fix feature failures one at a time. Some common rebuild errors include: Dangling Dimensions or Relations. Dimensions or relations to an entity that no longer exists. Features that cannot be rebuilt, such as a fillet that is too large.

Where is the rebuild tool in Solidworks?

The Rebuild toolbar buttons are located on the Standard toolbar. You can add the tools to the CommandManager, shortcut bars, and mouse gestures.

How do I stop a solidworks rebuild?

Click Tools > Options > System Options > Assemblies and under When Large Assembly Mode is active, select Suspend automatic rebuild.

How do I repair a sketch in Solidworks?

To open the Repair Sketch tool: Click Tools > Sketch Tools > Repair Sketch. Repair Sketch deletes these from the sketch. Repair Sketch merges these into a single entity.

How do you check for failures in Solidworks?

To identify failing components: After meshing has failed, right-click the Mesh icon and select Failure Diagnostics. To identify the problem with a component, select it in the list box. All faces and edges of the selected component that caused the meshing to fail highlight in the graphics area.

How do I find a circular reference in Solidworks?

In your assembly, simply go to your Command Manager, click on the Evaluate tab, then the Performance Evaluation. Alternately, you could use the dropdown menu and go to Tools > Evaluate > Performance Evaluation.

What factors affect performance of Solidworks?

Hardware Options

• Memory (RAM) Adding more RAM to a slow system is a cost-effective way to boost performance. …
• Processor (CPU) SOLIDWORKS, like other parametric modelers, primarily relies on linear processing. …
• Graphics Card (GPU) …
• Hard Drive. …
• SOLIDWORKS Rx. …
• Network Environment. …
• Upgrade SOLIDWORKS. …
• Turn Off Unused Add-Ins.

How do I rebuild a model in Solidworks?

To rebuild the model: Click Rebuild (Standard toolbar) or Edit > Rebuild, or press Ctrl + B. Rebuilds only the features that changed since the last rebuild. To rebuild all features, press Ctrl + Q.

How do you check rebuild time in Solidworks?

Click Rebuild (Standard toolbar) or Edit > Rebuild or press Ctrl+B. Reports the rebuild time for the total assembly. The report shows the time taken to rebuild significant components and features.

How do I turn on the freeze bar in Solidworks?

To turn on the freeze bar, click Tools > Options > System Options > General and select Enable Freeze bar. To freeze features: Move the pointer over the freeze bar.