What are the 5 steps to running a Simulation in SOLIDWORKS?

How do you run a Simulation in SOLIDWORKS?

To run a study, right-click its icon in the Simulation study tree and select Run or click Run in the Simulation toolbar. When you run one or multiple Simulation studies, they run as background processes. Simulation continues to run in the background after the SOLIDWORKS session is ended.

How do I run a force Simulation in SOLIDWORKS?

To apply a force:

1. Click Add a force. The Force PropertyManager appears.
2. In the graphics area, select the desired faces.
3. Select: Normal to apply the force in the direction normal to each selected face. …
4. Select the force units first, then enter the force value. …
5. Click . …
6. Click Next.

How do you run a static Simulation in SOLIDWORKS?

To perform static analysis:

1. Create a static study. …
2. Define material for each solid, shell, and beam. …
3. Define restraints. …
4. Define external loads.
5. For assemblies and multibody parts, use component contact and contact sets to simulate the behavior of the model.
6. Mesh the model and run the study. …
7. View the results:

How do you do a simulation?

How to Conduct a Simulation

1. Describe the possible outcomes.
2. Link each outcome to one or more random numbers.
3. Choose a source of random numbers.
4. Choose a random number.
5. Based on the random number, note the “simulated” outcome.
6. Repeat steps 4 and 5 multiple times; preferably, until the outcomes show a stable pattern.

How many types of simulation are there in SOLIDWORKS?

Like SOLIDWORKS CAD, Simulation is broken into 3 levels: Standard, Professional, and Premium. Each is a steppingstone to include unique study types to allow testing of different modes of failure. These include but are not limited to static, nonlinear, vibration, buckling, and drop tests.

How do I apply a load in SolidWorks?

How to Use Load Cases in SOLIDWORKS Simulation

1. Step 1: The Plan. …
2. Step 2: Open the File. …
3. Step 3: Create a New Static Study. …
4. Step 4: Apply the Material as Aluminum 1060 Alloy. …
5. Step 5: Apply Fixtures. …
6. Step 6: Apply Loads. …
7. Step 7: Mesh the Model. …
8. Step 8: Open Up the Load Case Manager.

How do I force a point in SolidWorks?

In the Simulation study tree, right-click the External Loads icon and select Force. The Force PropertyManager appears. Click inside the Faces, Edges, Vertices, and Reference Points for Force box , then select the entity to which the force is applied. Click Selected direction.

How do I create a motion analysis in SolidWorks?

You may right-click on the Motion Study tab to Create New Motion Studies. At the left upper corner side of the the MotionManager toolbar, pull-down and select Motion Analysis for the Type of Study.

What is SOLIDWORKS flow simulation?

SOLIDWORKS® Flow Simulation is an intuitive Computational Fluid Dynamics (CFD) solution embedded within SOLIDWORKS 3D CAD that enables you to quickly and easily simulate liquid and gas flows through and around your designs to calculate product performance and capabilities.

What types of analysis can SOLIDWORKS Simulation perform?

SOLIDWORKS Simulation Professional enables you to optimize your design, determine product mechanical resistance, product durability, topology, natural frequencies, and test heat transfer and buckling instabilities. It can also perform sequential multi-physics simulations.

How do I run SOLIDWORKS Simulation in assembly?

How to Use Solidworks Static Simulation in an Assembly

1. After the Add-Ins window is open, check the boxes shown below to activate the Simulation and then click OK to apply.
2. Once the simulation is active move to the Simulation tab and click on New Study.
3. Choose the Static simulation and then click OK (tick).

What is static simulation?

Static Simulation is a simulation model which has no internal history of both output and input values that were previously applied. It also represents a model in which time is not a factor. This type of simulation model usually has some function (f) which is made of inputs (u).