Quick Answer: How do you add detail in Solidworks?

How do you do a detailed view?

Once a detailed view is placed on the drawing sheet, you can modify the view, using the Drawing View dialog box.

1. Open a drawing.
2. Click Layout > Detailed. …
3. Select a point in an existing drawing view that you want to enlarge in a detailed view. …
4. Sketch a spline encompassing the area that you want to show in detail.

What is a detail view solidworks?

You create a detail view in a drawing to show a portion of a view, usually at an enlarged scale.

What is a detail view?

A detail view is a view of the model that appears as a callout or section in other views. This type of view typically represents the model at finer scales of detail than in the parent view.

How do I change the detail view in Solidworks?

Modifying a Detail View

1. Right-click the profile sketch and select Edit Sketch.
2. Edit the profile as needed to change the shape or size.
3. Click Rebuild to update the detail view.

How do you dimension a detail view in Solidworks?

Once the dimension is imported into the Section View, expand the Detail View circle to see the entire diameter, then hold Shift and drag the dimension to the Detail View. With this dimension moved, you can resize the Detail View circle and the dimension will automatically be foreshortened.

How do I view profile details in Solidworks?

First create a closed contour sketch where you want the detail view using either an ellipse, spline, or any other sketch geometry. Select the sketch and then select Detail View from the View Layout Tab.

How do I create a detail view in Autocad 2018?

Create a Detail View with a Rectangular Boundary

1. Click Layout tab > Create View panel > Detail drop-down > Rectangular. …
2. Click the view to use as the parent view. …
3. Click the center of the area to magnify.
4. Click a corner to define the area to magnify.

What are detail drawings?

Definition of detail drawing



: a separate large-scale drawing of a small part of a machine or structure especially : working drawing.

Why are detail views used?

A detail view is used to clarify specific areas of a drawing. Usually, an area is enlarged so that small details are easier to see.

What is the purpose of detail view in drawing?

A detail view shows a specific portion of the drawing view (it was generated from), at an enlarged scale. The illustration below shows the different entities generated by the VIEWDETAIL command, and the terms used to refer to them. Detail view styles control the appearance of each of the listed entities.

When you attach a balloon to a face it is attached with an arrow?

A Bill of Materials can only be created in the drawings of part files. When you attach a balloon to a face, it is attached with an arrow. When you attach a balloon to an edge, it is attached with an arrow. If you delete a driving dimension from a drawing view, the dimension will also be deleted from the model.

How do I hide crop view lines in Solidworks?

Right-click the drawing view in the graphics area or in the FeatureManager design tree and select Crop View > Remove Crop.