Question: How do you move a reference plane in Solidworks?

How do I change the sketch reference plane in Solidworks?

Select the sketch in the FeatureManager design tree, and click Edit, Sketch Plane. Right-click the sketch in the FeatureManager design tree, and select Edit Sketch Plane . Select a new plane in the FeatureManager design tree or select a new planar face in the model for Sketch Plane/Face . Click OK .

How do you offset a plane in Solidworks 2019?

You can also Ctrl + drag an existing plane to create a new plane that is offset from the existing plane.

Can you move the origin in Solidworks?

Click Tools > Sketch Tools > Align > Align Grid/Origin. In the Align Grid/Origin PropertyManager, under Selections: To change only the sketch origin: Select a vertex or point for Sketch Origin Location .

What is the command used to move a sketch onto a different plane solidworks?

To change the plane, right click on the sketch in the Feature Manager and select the Edit Sketch Plane Icon. When you do, the Edit Sketch Plane command opens. To change the plane, right click in the window and clear the selections.

Can you move a sketch in Solidworks?

#1 SOLIDWORKS TIPS: Move Sketches…….



While this sounds logical, it has simply never been the case. … First, Window select the sketch entities you wish to move. Second, Hold the CTRL key on your keyboard then Pick and Drag the selected entities from one of the Points in the Sketch.

How do you move a sketch in Solidworks 2020?

Move Sketch

1. Window select the sketch entities you wish to move.
2. Hold the CTRL key and click and drag the selected entities from a vertex, not an edge. …
3. You cant see it in the pictures below but a small “+” will appear next to your curser. …
4. Continue to drag to your desired vertex and release.

How many entities can you choose to mate with an angle mate?

Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.