Question: How do I use auxiliary view in Autocad?

How are auxiliary views drawn in CAD?

An auxiliary view is one that is projected onto a plane perpendicular to one of the orthographic views and inclined in the adjacent view. Two points define the inclined plane used for the auxiliary projection. Both points must be located in the same viewport.

How do you use auxiliary views?

To sketch an auxiliary view, you begin with orthographic. views of the object and add projection lines perpendicular (90^◦) to the slanted surface, adding a reference line any convenient distance from the view with the slanted surface.

What is auxiliary view in drawing?

 Auxiliary views are a type of orthographic projection. used to determine the true size and shape of inclined and oblique surfaces of objects.  Normally, auxiliary views are projected from existing. principal views.  However, auxiliary views can also be drawn first and.

Which is an example of an auxiliary view?

Types OF Auxiliary View:



For example, if the inclined surface is seen in the frontal plane, then such an auxiliary view will be called Frontal Auxiliary View. If the inclined surface is seen in the top plane, then such an auxiliary view will be called Top Auxiliary View.

Why are auxiliary views important?

Additional or auxiliary views are necessary to represent the true size and shape of other plane surfaces. A plane perpendicular to only one of the three principal planes is said to be in an inclined position; a plane not perpendicular to any of the principal planes is said to be in an oblique position.

What is the six types of auxiliary views?

Auxiliary views are used to find: 1) true length of an inclined or oblique line; 2) true size and shape (TSS) of an inclined or oblique face 3) edge view of oblique face; 4) point view of inclined or oblique line; 5) true size and shape of features on incline or oblique faces.

When the auxiliary view is hinged from the top the view is called?

An auxiliary view hinged on a front view is called a front auxiliary view. The plane on which an auxiliary view is projected is called a plane of rotation.

How many auxiliary views are necessary to true size?

it appears as a line and the projection is at a 90 degree angle. is taken from the view that shows the height in its true length. a second auxiliary view is needed to produce a true size and shape of the surface.