Question: How do I import a surface into Civil 3D?

Can I copy paste a surface in Civil 3D?

In the drawing area, select the surface, right-click, click Basic Modify Tools Copy. At the command line, you are prompted to specify a base point for the surface.

How do I add a surface to Autocad 3D?

To Create a Surface by Pressing or Pulling

1. Click Home tab Modeling panel Presspull. Find.
2. Click an edge of 3D object, an open spline, an arc, or another 2D object that does not form a closed area. …
3. Enter a value or click in the drawing area to indicate the height of the new surface object.

How do I import a surface from one drawing to another in Civil 3D?

To copy a surface (DTM) in Civil 3D, select the surface and then right-click. In the pop-up menu select BASIC MODIFY TOOLS, then select COPY. When prompted to enter the base point, enter 0, 0 at the command line, and press ENTER. When prompted to enter the second point, press ENTER.

How do you copy and paste in Civil 3D?

Copy and Paste with Base Point



Press Ctrl+Shift+C or enter COPYBASE at the command prompt or . Select the base point. Select the objects to copy and press Enter. The objects are now available to be pasted into the same drawing or another drawing.

What is eg surface in Civil 3D?

Surfaces are essential to just about anything done in AutoCAD Civil 3D. Often existing Surfaces are created and referenced into design drawings, for grading, corridor creation, etc. Existing surfaces are usually named EG (Existing Ground) or OG (Original Ground).

Can we do surface in AutoCAD?

AutoCAD provides two types of surfaces: procedural surfaces and NURBS surfaces. Use procedural surfaces to take advantage of associating surfaces with their defining curves. Use NURBS surfaces to take advantage of sculpting with control vertices.

How do you use surface blend in AutoCAD?

Surface Blend

1. Type BLENDSRF or SURFBLEND on the command line or command prompt and press Enter.
2. Select the first surface edge to blend.
3. Press Enter.
4. Select the second surface edge to blend, as shown below: For a square or rectangle surface, use the chain to select edges.
5. Press Enter.
6. Press Enter.