Question: How do I flatten a part in Solidworks?

How do I flatten a part in Solidworks 2021?

To flatten a surface:

1. In an open part, click Flatten (Surfaces toolbar) or Insert > Surface > Flatten. …
2. Select faces in the graphics area or from the FeatureManager design tree.
3. Then select a vertex. …
4. In the PropertyManager, click Relief Cuts.

Why is surface flatten greyed out?

The reason for the “Flatten” icon being greyed out was because the sheet metal part had a “Flat Pattern” annotation view and this annotation view was active. By selecting another annotation view, the “Flatten” icon then becomes available again.

How do you flatten rolled sheet metal?

Hammer and flame: flattening sheet metal with extensive expertise and time. Hammer and flame – The art of leveling parts or sheets with this method still exists in the metal fabrication industry. This method uses a hammer to flatten the sheet metal part.

How do you add bends in Solidworks?

Using Insert Bends to Add a Body

1. In a sheet metal part, select or create a plane and draw a profile sketch.
2. Click Extruded Boss/Base (Features toolbar).
3. In the PropertyManager: Set the direction and depth of the extrusion. …
4. Click Insert Bends. (Sheet Metal toolbar) or Insert > Sheet Metal > Bends .
5. In the PropertyManager:

What is a lofted bend?

Lofted bends in sheet metal parts use two open-profile sketches that are connected by a loft. The Base-Flange feature is not used with the Lofted Bend feature. Begin with two open profile sketches. Use Lofted Bends to create a solid feature.

How do you flatten a sphere in Solidworks?

To flatten a surface: In an open part, click Flatten (Surfaces toolbar) or Insert > Surface > Flatten.

How can you tell if a surface is flat in Solidworks?

Click Insert > Features > Move/Copy. You can use the Measure tool to check your flattened surface for accuracy. Measure the surface area of the folded and flattened features. If there is a large discrepancy between the surface areas, the flattened feature might not be accurate.

How do you flatten a tube?

For Tube Flattening, the punch press operation is a cost-effective way to produce a flat tube end for tubular assemblies. Using a dedicated die set, this process combines three separate operations, flattening the end of the tube, trimming the end corners, and piercing a hole pattern for fastening the tube.