How do you use the miter flange command in Solidworks?

What is a miter flange in Solidworks?

A miter flange feature adds a series of flanges to one or more edges of a sheet metal part. The sketch for a miter flange must adhere to the following requirements: The sketch can contain lines or arcs. If you use an arc to create a miter flange, the arc cannot be tangent to the thickness edge.

How do you make a flange in Solidworks?

To create a base flange:

1. Create a single open, single closed, or multiple contained closed sketch. …
2. Click Base Flange/Tab on the Sheet Metal toolbar, or click Insert > Sheet Metal > Base Flange. …
3. Set options in the PropertyManager and click .

What is difference between Miter flange and edge flange?

Edge Flange: Combines a bend and sheet metal tab in a single operation. User selects the desired edge, bend radius, angle, flange length, and flange position. Miter Flange: Allows the user to add multiple flanges to one or more of the edges of the sheet metal part.

How do you close a corner in Solidworks?

Click Closed Corner (Sheet Metal toolbar) or Insert > Sheet Metal > Closed Corner. Select one or more planar faces for Faces to Extend . The SOLIDWORKS software attempts to find the Faces to Match . If matching faces are not found, you can manually select the Faces to Extend and Faces to Match.

How do you use the base flange tab in SOLIDWORKS?

Using a Base Flange to Add a Body

1. In a sheet metal part, click Base Flange/Tab. …
2. Draw a sketch on the plane containing the edge where you want to place the body.
3. Exit the sketch.
4. In the PropertyManager, under Sheet Metal Parameters, clear Merge result.
5. Click .

How do you make a flange?

Here’s some advice on flange preparation.

1. Step 1: Inspection. Examine both flange faces carefully for damage like cracks, dings, burrs and radial scoring. …
2. Step 2: Clean the Mating Faces. It’s common for traces of the old gasket to remain on the flange surfaces. …
3. Step 3: Preparation. …
4. Do it once.

What is an edge flange?

You can add edge flanges to one or more edges. General edge flange characteristics include: Thickness is linked to the thickness of the sheet metal part. Sketch line of the profile must lie on the selected edge.

How do I change the edge flange in SolidWorks?

Editing Profile Sketches



To edit the profile sketch: Do one of the following: When editing an edge flange feature, click Edit Flange Profile under Flange Parameters. When editing a cross break, click Edit Cross Profile under Cross Break Parameters.

How does sheet metal work in SolidWorks?

To do this we simply need to right-click any tab on the CommandManager and select Sheet Metal from the drop down menu. Next, we will activate the Sheet Metal tab of the Command Manager and click Base Flange/Tab tool, which should be the first tool on the right not grayed out when beginning a part.