What is rib command?
Rib command. Rib command. Constructs a rib by extruding a profile. The Direction and Side steps allow you to control the shape of the rib.
What is rib Catia v5?
To define a rib, you need a center curve, a planar profile and possibly a reference element or a pulling direction. To create ribs you can combine the different elements as follows: Open profile. Closed profile. Pulling direction.
What is rib CAD?
Feb 12 2014In-product view. Use Rib to create ribs (thin-walled closed support shapes) and webs (thin-walled open support shapes) using an open or closed profile. Ribs can have a thickness normal to the sketch plane and extend material planar to the sketch.
How do you use rib in Autodesk?
Note: To create a rib network or web network, sketch multiple intersecting or nonintersecting profiles on the sketch plane.
- On the ribbon, click 3D Model tab Create panel Rib .
- If the profile is not selected, select it.
- Set the direction of the extrusion: …
- Click a Direction to specify which way the rib is extruded.
How do you use stiffener in Catia?
This task shows you how to create a stiffener by specifying creation directions. Open the Stiffener. CATPart document. Select the profile to be extruded, that is Sketch.
…
- Click Stiffener . …
- Uncheck the Neutral Fiber option. …
- Check the Neutral Fiber option again. …
- Enter 12 as the thickness value. …
- Click OK .
How do you use multi section solid in Catia?
Click Multi-sections Solid . The Multi-sections Solid Definition dialog box appears. Select the three section curves as shown: They are highlighted in the geometry area.
…
Guides
- Remove the selected curve.
- Replace the selected curve by another curve.
- Add another curve.
How do you combine solid in Catia v5?
Click Solid Combine . The Combine Definition dialog box appears. Select Sketch.
…
The components you can select are:
- Sketches.
- Surfaces.
- Sketches sub-elements: for this, use the Go to Profile definition contextual command. (for more information, refer to Using the Sub-elements of a Sketch)
- 3D planar curves.
How does the rib feature work in Solidworks?
Rib is a special type of extruded feature created from open or closed sketched contours. It adds material of a specified thickness in a specified direction between the contour and an existing part. You can create a rib using single or multiple sketches.
How do you build an airplane?
Creating Planes
- Click Plane (Reference Geometry toolbar) or Insert > Reference Geometry > Plane .
- In the PropertyManager, select an entity for First Reference . …
- Select a Second Reference and Third Reference as necessary to define the plane. …
- Click .
What is rib in engineering drawing?
TERMINOLOGY Rib and Web are thin , flat feature of an object that acts as a structural support. Rib Rib Web. Spoke is the rod radiating from the hub to the rim of a wheel.
What do ribs and webs do?
Ribs and webs are useful for reinforcing relatively thin walls and avoiding thick sections. In addition to increasing the strength and rigidity of a thin wall, they improve material flow and limit distortion.
What is the difference between web and rib?
is that web is the silken structure a spider builds using silk secreted from the spinnerets at the caudal tip of its abdomen; a spiderweb while rib is any of a series of long curved bones occurring in 12 pairs in humans and other animals and extending from the spine to or toward the sternum.