How do you start a new assembly document in Solidworks?

How do I create an assembly file in SolidWorks?

Creating an Assembly from a Part

1. Click Make Assembly from Part/Assembly (Standard toolbar) or File > Make Assembly from Part. An assembly opens with the Insert Component PropertyManager active.
2. Click in the graphics area to add the part to the assembly. SOLIDWORKS makes the first component fixed.

How should you create a new part or assembly?

To create a part within an assembly:

1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
2. Enter a name for the new part in the Save As dialog box and click Save.
3. Select a plane or planar face (while the pointer is ).

How do I reset a SolidWorks assembly?

Click Options or Tools > Options and click Assemblies. Click Reset to restore factory defaults for all system options or only for options on this page.

Is it possible to create a new part in assembly mode?

You can create a new part in the context of an assembly. That way you can use the geometry of other assembly components while designing the part. You can also create a new subassembly in the context of another assembly.

Can you save an assembly as a part in Solidworks?

With your top level assembly open, left click on a sub-assembly that you would like to save as a part and chose Open Subassembly. 2. With the sub-assembly open click File, Save as. Chose the option to Save as when prompted.

How do I convert assembly to part in Solidworks?

To save a part as an assembly and create instance counts from similar bodies:

1. Click Insert > Features > Save Bodies.
2. In the Save Bodies PropertyManager, under Create Assembly, select Derive resulting parts from similar bodies or cut list.

How do I add parts to assembly in Solidworks?

Right-click the component and click Insert Into Assembly. You can populate one or more holes in the assembly by preselecting the circular edges of the holes and then using Insert Into Assembly. If you do not preselect a hole, the part is placed at the assembly origin.

Which command you use to add new parts to the assembly?

You can create a new part within an assembly using the Create Part In-Place command. If you are working in a newly created assembly document, you must save that document before you can create a part in place. Choose the Create Part In-Place command .

How do I open assembly in Solidworks 2020?

Opening Components from Assembly Documents

1. Click or right-click a part and click Open Part .
2. Click or right-click a subassembly, and then, on the Open Part drop-down, select the subassembly.

How do I change the path of a file in Solidworks?

To edit the locations and names of referenced files:

1. Click Open or File > Open.
2. In the Open dialog box, click References. The Edit Referenced File Locations dialog box appears.
3. Edit the path or filename using one of the following methods: …
4. Click OK to make the changes and exit the dialog.

How do you change WCS in Solidworks?

To translate a coordinate system to a new location:

1. Click Coordinate System (Reference Geometry toolbar) or Insert > Reference Geometry > Coordinate System .
2. Define the coordinate system at a location on the part or assembly that provides the entities you need to control the angle and direction of each axis.

How do I change axis in Solidworks?

Article

1. Press Space to bring up the View Orientation window, or right-click the graphics view and choose View Orientation.
2. Choose the desired option from the Up Axis Flyout (shown below) Specifying the Up axis.
3. Try out the new orientations. Any existing drawing views will also be updated.

How do you save an assembly as a part?

Save Assembly as Part PropertyManager

1. In an assembly, click File > Save As.
2. Select Part (*. prt;*. sldprt) for the file type.
3. Select Include specified components.
4. Select Override defaults.
5. Click Save.

How do I move sketch from assembly to part in Solidworks?

In the assembly, edit the profile of the sketch. While in the profile, perform a Ctrl + A (Select All), then a Ctrl + C (Copy). In the part file, go to the Sketch command and select the desired reference plane that you want the sketch to be on. Ctrl + V to Paste.