How do you revolve in Solidworks?

Why can’t I revolve SolidWorks?

Unless you’re creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Try using an Extruded Boss/Base to check whether your profile is closed.

What is the function of revolve in SolidWorks?

Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.

How do you do a revolved cut in SolidWorks?

Creating Extruded or Revolved Cuts as Assembly Features

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you use revolve Extrude in Solidworks?

Creating Extruded or Revolved Cuts as Assembly Features

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you create a Revolve base in Solidworks?

Creating Revolve Features

1. Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
2. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.
3. Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.

How do you make a cone in Solidworks?

To create a cone:

1. Click Solids > Draw > Cone (or type Cone).
2. Set an option for the cone’s base: Center point base: Click in the graphics area to specify a center point or type the 3D coordinates. …
3. Set the cone height: Click in the graphics area or type a value. – or –

How do you use the shell tool in Solidworks?

The Solidworks shell tool is located in both features commandmanager and Insert menubar.

…

How to Use Solidworks Shell Tool

1. Step 1: Create New Part File. Open Solidworks CAD software and create new part file. …
2. Step 2: Create Rectangle Box. …
3. Step 3: Select SolidWorks Shell Tool. …
4. Step 4: Apply Solidworks Shell Tool.

How do you make a lofted base in Solidworks?

To create lofts:

1. Do one of the following: Click Lofted Boss/Base (Features toolbar) or Insert > Boss/Base > Loft. Click Lofted Cut (Features toolbar) or Cut > Loft > Insert. Click Lofted Surface (Surfaces toolbar) or Insert > Surface > Loft.
2. Set the options in the PropertyManager.
3. Click .

What is loft in SolidWorks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

What is revolve function?

The Revolve command in AutoCAD 3D is used to create a 3D solid or surface by sweeping the object through its axis at a predefined angle. The paths and objects that can be revolved are: Planar. Non-planar.

What is revolve in geometry?

Revolve is a method of defining three-dimensional geometry by revolving a sketched section around a centerline. Use the Revolve tool to create a solid or surface feature, and to add or remove material.

How do you use the revolve command in Fusion 360?

Note: When you invoke the Revolve command, and there is only one profile visible in your design, it gets automatically selected.

1. Design > Solid > Create > Revolve.
2. Design > Surface > Create > Revolve.
3. Design > Form > Create > Revolve.