How do you revolve a sketch in SolidWorks?

How do you revolve in SolidWorks?

To create a revolved surface:

1. Sketch a profile and a centerline around which to revolve the profile.
2. Click Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.
3. Set the PropertyManager options.
4. Click OK .

Why can’t I revolve SolidWorks?

Unless you’re creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Try using an Extruded Boss/Base to check whether your profile is closed.

Can you revolve a 3D sketch in SolidWorks?

The sketch for a thin or surface revolved feature can contain multiple open or closed intersecting profiles. The profile sketch must be a 2D sketch; 3D sketches are not supported for profiles. The Axis of Revolution can be a 3D sketch.

What is the revolve feature in SolidWorks?

Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.

How do you make a revolve?

To view the revolve, open a 3D view.

…

Use the Draw tools to sketch a shape to revolve around the axis:

1. Click Modify | Create Revolve tab Draw panel (Boundary Line).
2. To create a single revolve, sketch a closed loop.
3. To create more than one revolve, sketch multiple, non-intersecting, closed loops.

How do you use revolve Extrude in Solidworks?

Creating Extruded or Revolved Cuts as Assembly Features

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you create a Revolve base in Solidworks?

Creating Revolve Features

1. Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
2. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.
3. Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.

How do you draw a construction line in Solidworks?

Click Tools > Sketch Tools > Construction Geometry. Select the For construction check box in the PropertyManager. Right-click any selected sketch entity and select Construction Geometry.

How do you make a circular pattern in Solidworks?

To create circular sketch patterns:

1. In an open sketch, click Circular Sketch Pattern (Sketch toolbar) or Tools > Sketch Tools > Circular Pattern.
2. In the PropertyManager, under Entities to Pattern, select the sketch entities to pattern .
3. Under Parameters: Click Reverse direction . …
4. Click .

What is loft in Solidworks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

How can you tell if you are sketching on a different sketch plane?

How can you tell if you are sketching on a different sketch plane? The coordinate triad has changed its position to represent the position of the plane you are sketching on.

What is the default sketch plane?

The sketch is the basis for a 3D model. You can create a sketch on any of the default planes (Front Plane, Top Plane, and Right Plane), or a created plane.