How do you read a house plan?

How do you read a door size for a house plan?

For example a door may have a size of 2868 – the number alternates between feet and inches, first number is feet, second is inches, third is feet again and the last is inches. That makes that number 2′ 8″ x 6′ 8″. The first set of numbers, 2′ 8″ is the width, the second set, 6′ 8″ is the height.

How do you read floor plan scales?

The lines represent the walls of the building, and the space in between the lines represents the floor. In order to find the actual dimensions from a floor plan, you can set up and solve a proportion. The scale given in the drawing is the first ratio. The unknown length and the scale length is the second ratio.

How do you read a plumbing plan?

How to Read Plumbing Blueprints

1. Obtain a guide to the plumbing symbols on a blueprint. …
2. Spread the blueprint on a table, counter or other flat surface that will allow you to read the entire page at once. …
3. Read the schedules that accompany the blueprints. …
4. Identify the symbols for major plumbing fixtures such as sinks, showers, bathtubs and toilets.

What size door is a 2668?

Technically the most correct. 2668 RH. Written this way on most door quotes. 32″ x 80″ x 1-3/8″.

What comes first width or length in a room?

For a square or rectangular room, you will first need to measure the length and then the width of the room. Then multiply the length and width. Length x Width = Area. So, if your room measures 11 feet wide x 15 feet long, your total area will be 165 square feet.

Are floor plans to scale?

In architecture and building engineering, a floor plan is a drawing to scale, showing a view from above, of the relationships between rooms, spaces, traffic patterns, and other physical features at one level of a structure. Dimensions are usually drawn between the walls to specify room sizes and wall lengths.

What are dotted lines on floor plans?

A dotted line indicates architectural details within interior space, such as a tray or coffered ceiling; they may be called out in writing on the plan, too. A narrow rectangle composed with dotted lines typically indicates a beam in the ceiling.

How do you find the scale of a plan?

To do so, multiply the drawn length by the scale factor. Scale Calculation: 12 x 200 = ? Now that you know the actual length of the wall in reality, you can rescale it to any of your chosen scales. So, to get to 1:500, simply divide the length (24m) by 500.4 мая 2016 г.

Do blueprints show plumbing?

Do the plans/blueprints include plumbing and electrical? … The rough plumbing is included on the plans showing the kitchen and bath fixture symbols and their locations. However, the location of where the pipes come into the house is site specific and not included on the plans.

How do you read architectural plans?

The Basics: How to Read Architectural Plans

1. Be organized and diligent when reading plans. Start in upper left corner and work way across page so as not to miss any details.
2. Read the plan cover sheet. …
3. There are often reference points that are used between professionals and sets of drawings. …
4. Review the plan index which provides a list of all plan sheets.

What are door sizes?

Standard entry door measurements: Height: 80-inches (6-feet, 8-inches) Thickness: 1 3/4-inches. Width: 36-inches standard; 30- and 32-inches also available.

What does a 3 0 door mean?

A: Doors are measured in feet and inches as follows: a standard 36″ wide x 80″ height x 1-3/4″ thick door is called a 3/0 (“three oh”, which means 3 feet, 0 inches) x 6/8 (“six eight”, which means 6 feet, 8 inches) x 1-3/4″. … For instance, a standard 3/0 x 6/8 door would require a 38″ x 82-1/2″ rough opening.

What size is a standard bedroom door?

The Standard Bedroom Door Height And Width

But, if we talk about one standard size, then the width of the door can be anywhere between 24 inches, 28 inches up to 32 inches. The height of the door is 80 inches usually. So that even a person with a tall height can pass through easily without having to stoop.