How do you pin a 3D view in Revit?

How do I lock a 3D view in Revit 2020?

To lock the view, go to the View Control Bar at the bottom of the Revit interface and click on the little house with the padlock (Lock 3D View). Click this icon and choose the ‘Save Orientation and Lock View’ option.

How do I pin a 3D view?

How To Lock a 3D View

1. Create and save the 3D view so it appears in the project browser.
2. Setup the 3D view to how you want it to look.
3. To lock the 3D View click the “Locked 3D View” button found at the bottom of Revit, it looks like a house with a padlock.

How do I lock a sheet view in Revit?

Lock the Position of a View on a Sheet

1. Open the sheet.
2. Select the view to lock in place on the sheet.
3. Click Modify | Viewports tab Modify panel (Pin).
4. The pin icon displays on the view, indicating that it is locked in place.

How do you lock zoom in Revit?

Right-click the ViewCube and click Lock to Selection. If Lock to Selection is checked when a view orientation change occurs, the ViewCube uses the selected objects to calculate the center of the view and zooms to the extents of the selected objects.

How do you lock in Revit?

Open the Revit Server Administrator. In the tree control, select the item, and click (lock). Note: If you use the command-line utility to apply a lock, the lock icon displays after a refresh operation, and information about the model in use displays in the right pane.

How do you lock an angle in Revit?

Use the Align Tool. Select the Reference Plane first, then hover the cursor over the endpoint of the Reference Line until you see the blue dot, then click and then lock.

How do you unlock Revit models?

Just click on view template in the properties panel and then click on model ovverides etc. Or select “none” in view template list, click ok. Now you can type vv or vg and manually control all.

Where is the view control bar in Revit?

The View Control Bar is located at the bottom of the view window above the status bar and includes the following tools: Note: The exact tools available on the View Control Bar depends on the view type. Show/Hide Rendering Dialog (Available only when the drawing area displays a 3D view.)