How do you make something fully defined in SolidWorks?

Why is my sketch not fully defined?

In this tech tip we’ll answer the common question: Why is my SOLIDWORKS Sketch Pattern Under Defined? The reason is because the sketch instances can rotate. You could previously Fully Define the instances by adding a Horizontal or Vertical relation on one of the construction lines tied to the instances.

How do you tell if a part is fully defined in SolidWorks?

The sketch is fully defined if the lines on the sketch are all black. This means that there can be no unexpected changes within the model due to all the geometry of the sketch being fully defined.

What does a fully defined sketch mean?

Fully defines the sketch by applying combinations of relations and dimensions. Selected entities. Applies relations and dimensions only to specific sketch entities that you select for Entities to Fully Define. Calculate.

How do I make text fully defined in Solidworks?

Sketching Text

1. Click a face of a part.
2. Click Text. …
3. In the graphics area, select an edge, curve, sketch, or sketch segment. …
4. In the PropertyManager, under Text, type the text to display. …
5. Set the properties in the Sketch Text PropertyManager as necessary.
6. Click .
7. With the sketch still open, extrude or cut the text.

How do you fully define an assembly?

How to make an assembly fully defined in Solid works ?

1. First of all Insert a component as you can this is fully defined because this is automatically fixed.. …
2. Insert another component anywhere .
3. Select outer surface of small pin And select internal surface of first part as in picture.

How do you make a circular pattern fully defined in Solidworks?

To create circular sketch patterns:

1. In an open sketch, click Circular Sketch Pattern (Sketch toolbar) or Tools > Sketch Tools > Circular Pattern.
2. In the PropertyManager, under Entities to Pattern, select the sketch entities to pattern .
3. Under Parameters: Click Reverse direction . …
4. Click .

What is the meaning of a fully defined sketch in Solidworks?

The Fully Define Sketch tool calculates which dimensions and relations are required to fully define under defined sketches or selected sketch entities. You can access Fully Define Sketch at any point and with any combination of dimensions and relations already added.

How do you correct an over defined sketch in SolidWorks?

To manually repair over defined sketches:

1. In the PropertyManager, under Message, click Manual Repair. All relations and dimensions in the sketch appear under Conflicting Relations/Dimensions.
2. Select each relation or dimension to highlight it in the graphics area. For example: …
3. Click Delete. Valid solution found. …
4. Click .

How do you create a polygon in SolidWorks?

To create a polygon:

1. Click Polygon. …
2. Set the properties in the Polygon PropertyManager as necessary.
3. Click in the graphics area to place the center of the polygon, and drag out the polygon. …
4. To sketch another polygon, click New Polygon and repeat steps 2 through 5.
5. Click .

Why is it necessary to dimension a sketch what dimensions are needed to fully describe a sketch?

Why is it necessary to dimension a sketch? In order to know the size and location of features.