How do you make an opposite part in Solidworks?

How do you invert a part in Solidworks?

To invert selection:

1. Select items to be excluded.
2. Click Invert Selection. (Selection filter toolbar) or Tools > Invert Selection.

How do you make a mirrored feature independent in Solidworks?

Optionally, if you want to independently edit the features of the mirrored part without affecting the original part, under Link, click Break link to original part. You can also break the link to the original part later by listing the mirrored part’s external references and selecting Break All.

How do you make a part based on another part in Solidworks?

With a part document open, click Insert Part (Features toolbar) or Insert > Part. Browse to a part document and click Open. The Insert Part PropertyManager appears. Under Transfer, select any combination of items from the inserted part to be included in the derived part.

How do you mirror a part in Solidworks 2021?

Mirror Feature PropertyManager

1. In a part, click Mirror (Features toolbar) or Insert > Pattern/Mirror > Mirror.
2. In an assembly, click Assembly Features (Assembly tab on the CommandManager) and click Mirror , or click Insert > Assembly Feature > Mirror.

What is invert selection in Solidworks?

When you select items (usually a small number) and invert the selection, all other similar items in the document are selected and the original selections are canceled. To invert selection: Select items to be excluded. Click Invert Selection.

Where is mirror in Solidworks?

The mirror entities feature can be found under the ‘sketch’ tab in the command manager or in tools > sketch tools > mirror.

How do you mirror a body in Solidworks?

To mirror a feature:

1. Click Mirror on the Features toolbar or Insert, Pattern/Mirror, Mirror.
2. Under Mirror Face/Plane , select a face or a plane in the graphics area. You can select features, the faces that comprise features, or a body with multibody parts.

How do I mirror a sketch in Solidworks?

To mirror sketch entities as you sketch them:

1. Select a line or a model edge in an open sketch.
2. Click Dynamic Mirror Entities. (Sketch toolbar) or Tools > Sketch Tools > Dynamic Mirror . …
3. Create the sketch entities that you want to mirror. …
4. To turn mirroring off, click Dynamic Mirror Entities.

How do you mirror an assembly in Solidworks and delete original?

Once the newly created mirror body is created, you can then delete the initial part with a delete bodies command. (Insert > Features > Delete/Keep Body). With the body now deleted, the process is complete and you can toggle between the right-hand and the left-hand configurations within the part.

Can you mirror a Solidworks assembly?

Mirror an assembly feature. In an assembly, click Assembly Features (Assembly tab on the CommandManager) and click Mirror , or click Insert > Assembly Feature > Mirror. See Mirroring Features. Add another instance of an assembly component, positioned symmetrically about a plane.

How do you mirror a loft in Solidworks?

To mirror a feature: Click Mirror (Features toolbar) or Insert > Pattern/Mirror > Mirror. Under Mirror Face/Plane , select a face or a plane in the graphics area. You can select features, the faces that comprise features, or a body with multibody parts.

How do I add assembly to part in Solidworks?

To insert a new subassembly: Do one of the following: In the FeatureManager design tree, right-click either the top-level assembly icon or the icon for an existing subassembly, and select Insert New Subassembly. Click New Assembly (Assembly toolbar) or Insert > Component > New Assembly.

How do you make a multi body in Solidworks?

Saving an Assembly as a Multibody Part

1. Open an assembly document.
2. Click File > Save As. The Save As dialog box appears.
3. Set the Save as type to Part (*. prt, *. …
4. Select one of the following: Exterior Faces to save the exterior faces as Surface Bodies . …
5. Select or clear the following: …
6. Click Save.

How do I add a new part in Solidworks?

You can create a new part from solid bodies or surface bodies. To open the Insert Into New Part PropertyManager: Right-click a solid body or surface body and click Insert Into New Part .